206 BSI Siemens

[wwa]

Hello, I need pin form BSI and virgin dump. I read more post, but I don't know who type BSI I have,

In BSI is MCU mask: 1K20C
I can't found 95160,
Number BSI: 9638160680 00
S105872400 H

I need read only MCU ?

[wwa]

Dump from MCU.
I need Virgin, and PIN


85579

[wwa]

Nobody have solution: ?

[smokinjoe]

think your reading the wrong memory,206 BSI should be 95160 or HC912,what year is the car?

[wwa]

2000 1.6 16V

I don't have 95160 or HC912
I have only HC705, dump in first post.
Maybe someone do virgin like HC05 ?

I look DTC with PP2000 and in ECU I have only "???"
I upload flash from ECU maybe someone do immo off,
I'm not sure ecu is good.


85748

85749

85750

[lupu_sandu]

Dump seems fine, also pin code.
What is problem with car?

[wwa]

Car not start. Starter works fine, but engine not start. I try do adaptations of injector, or fuel pump but PP2000 say "It not possible" and everywhere in value of I have "????" I think flash in ECU is damage (29F400), I'm waiting on deliver with Willem AT3 when will u put me dump. I try with Galletto but not work. Sorry for my english. :)

[benci1982]

hi. pin code is: MN3G, or G3NM
look the fuses :

[wwa]

Thanks I have PIN from another member. I checked all fuses and cable, previously.

[wwa]

Hello, I read the flash from the ECU. Maybe someone look if everything is OK, or do IMMO OFF.

[autocargo]

I've got same BSI S105872400
In BSI is MCU mask: 1K20C
Got two different dumps and looking for codes to adapt keys to them...
Regards.

[ammarben]

NP9K bsi1
AA62 bsi2

[dragoshu]

Hello,
Can sombody give pin code ,for this 206 peugeote inside bsi 1k20C.need code to adapt transponder.
Thanks.

[rafal]

WWFH................

[Talleresmalaga]

Car not start. Starter works fine, but engine not start. I try do adaptations of injector, or fuel pump but PP2000 say "It not possible" and everywhere in value of I have "????" I think flash in ECU is damage (29F400), I'm waiting on deliver with Willem AT3 when will u put me dump. I try with Galletto but not work. Sorry for my english. :)

Good morning, what version Diagbox uses, version from 07.02 to 07.07 should work, for 206/307 I use 07.06, for me it works well, more current versions do not recognize the unit or the codes of failure .. throws error ???


What engine code is NFU Gasoline?, I do not have a price that needs pump or injector coding


That ecu is Me7.4.5, Me7.4.4, ...


Do you have ids and diagbox in the same S.O?


all this can prove the error, ???


Can you try another multi-brand scanner?


If you do not have another scaner or do not want to try 1 to 1 versions of Diagbox, I would verify the electric supply of the fuel pump and fuel tank, also the injector pulses, the spark plug and the camshaft and crankshaft sensors


regards