OPEL VECTRA C DPF OFF 1.9`

[immokill]

HI


Could someone please turn DPF OFF on this
BOSCH ECU 0 281 012 534 from VECTRA C 1.9 diesel.



Regards

[EcoPowerUK]

Here is your file, DPF Removed using volta.
PW PM

[mifko]

Vectra C 1.9 CDTi EDC16C9 need remove DPF.
Thanks in advance ! ecusafe:s::s::s::s::s::s:

[JaboJG]

Vectra C 1.9 CDTi EDC16C9 need remove DPF.
Thanks in advance ! ecusafe:s::s::s::s::s::s:

Did you use BDM to dump? BDM dump should work with ECUSafe...

[edc]

to do it properly DPF_OFF you need full BDM read ...

[mifko]

that the BDM is read and so far no problems with ecusafe. Master says that the level of saturation is still at 98%. It is possible that my damp OK, that master of error

[mifko]

:adore: vectra c offffffffff?

[mariusmilanezu]

"OPEL VECTRA C DPF OFF 1.9` HI"


"Could someone please turn DPF OFF on this
BOSCH ECU 0 281 012 534 from VECTRA C 1.9 diesel."

Hire your file DPF removed with ECUsafe!!!
If is ok replay.

[dtomas22]

thanks guys

[bazare]

ECU safe solution for opel edc16c9 / c39 will still regenerate from time to time with white smoke behind the car. No DTC stored because all DTC tables is deleted by ECUSAFE of course.

[mislav88]

ECU safe solution for opel edc16c9 / c39 will still regenerate from time to time with white smoke behind the car. No DTC stored because all DTC tables is deleted by ECUSAFE of course.
is that for MPPS partial read as someone said it works nice if you process full BDM read through ecusafe?

[bazare]

if you don't pay atention to white smoke every few hundred km it works in both partial read and full BDM read. But solution is not really working because car is still regenerating from time to time.

[icezero2010]

you must set the after injection to 0 than is the car in regenerationmode but the Car don?t smoke ;-)