DAS-XENTRY can't detect MUX

[viercha]

Hi

I have succsesfully installed DAS-XENTRY 09.2011 without any problems. Serial Port settings are ok COM2 Baudrate 115200. SDNetControl communication to MUX is automatic cable selection. Then i run SDConnect Toolkit it does not detect my MUX, no equipment avialable. Tried Xentry blacklist fix (lic.sli) same error.

Please can anybody help me to connect my MUX to Laptop?
Thanks in advance

[selefkos]

Hi

I have succsesfully installed DAS-XENTRY 09.2011 without any problems. Serial Port settings are ok COM2 Baudrate 115200. SDNetControl communication to MUX is automatic cable selection. Then i run SDConnect Toolkit it does not detect my MUX, no equipment avialable. Tried Xentry blacklist fix (lic.sli) same error.

Please can anybody help me to connect my MUX to Laptop?
Thanks in advance

click here m8

http://www.digital-kaos.co.uk/forums/f152/install-solution-das-xentry-09-2011-a-233670/index2.html

regards
Selefkos

[Bigovic]

Use Impactcops solution, don?t other ways so are you Luck ;-)

[viercha]

I have tried it CAL_REAL.dll but SDConnect Toolkit same error can't detect MUX. Any sugestions?

[selefkos]

I have tried it CAL_REAL.dll but SDConnect Toolkit same error can't detect MUX. Any sugestions?


Hi m8,
try this Solution !!!
replace this files in:
F:/Programme/Das/bin


regards
Selefkos

[viercha]

Thanks i will try it on Tuesday. DAS gave me error that MUX is not selected before. and SDConnect Toolkit was no equipment.
Thanks for quick answer Selefkos

[viercha]

Hi,

Forgot to mention that DAS gives me error

Fault (1.2)-2.503.13003

Any Ideas? Tommorow I will try fixes from here.

[viercha]

Hi

Now DAS 09.2011 is working fine but in SDConnect Toolkit i still cant see my MUX. It writes No equipment avialable. Xentry still cant detect MUX. Cant determinate Ignition status and gives error: Initialization of the multiplexer failed.

Possible cause and remedy:
The connection between the multiplexer and the diagnostic socket has an open circuit.