View Full Version : dm800 clone bricked ?
bph
29th October, 2011, 07:21 PM
hi i tried to reflash my clone dm800hd but laptop shut down halfway through.i can not get web interface up.but can connect with patched dreamup my ip on box says 192.168.1.13 but when i try to flash with dreamup it stays on calculating checksum (box says serial mode)any help as i think it may be bricked.image trying to put on is ferrari domica 8
leez
29th October, 2011, 11:07 PM
put on image with serial lead in com port of a pc and dm box m8 .. using dreamup..
porter1
30th October, 2011, 09:41 AM
and persevere,sometimes just kicks in,if at first ye dont succeed ,try,try again
lincsat
30th October, 2011, 09:46 AM
Or you could try the Dreambox OptiFlasher. Make sure you use the correct image for the SIM in your box, Ferrari or SIM2
southpaw
30th October, 2011, 10:58 AM
If you got it displaying a IP address you can flash by browser. Just type it into address bar
bph
31st October, 2011, 07:59 AM
when using dreamup and putting any ip in(ie the one i can last remember)it says dm800 and loads up serial interface displaying ip i put in .(says serial http mode on dreamup).it will not connect through web browser and if i try to flash any image ie the last one i had it takes about 1 hour to flash then says failed crc box will be unstable.any ideas or anyone in middlesbrough area available to help cheers
plasterer
31st October, 2011, 08:06 AM
Could try a diff image with a diff web browser mate
Firefox or alternative
Hope this helps ..............Paul
leez
31st October, 2011, 09:49 AM
when using dreamup and putting any ip in(ie the one i can last remember)it says dm800 and loads up serial interface displaying ip i put in .(says serial http mode on dreamup).it will not connect through web browser and if i try to flash any image ie the last one i had it takes about 1 hour to flash then says failed crc box will be unstable.any ideas or anyone in middlesbrough area available to help cheers
use the patched dreamup by forkhire on here somewhere m8 .. are you sure you are using right image for your sim and ssl ..bl whatever it says on the front display ..:itsme:
bph
31st October, 2011, 10:32 AM
use the patched dreamup by forkhire on here somewhere m8 .. are you sure you are using right image for your sim and ssl ..bl whatever it says on the front display ..:itsme:
yes using domica 8 ferrari the last image on the box and patched dreamup from here.also tried other ferrari images but same thing also tried ie and firefox realy stuck on this one.any one from middlesbrough or know any companys etc .
leez
31st October, 2011, 10:47 AM
yes using domica 8 ferrari the last image on the box and patched dreamup from here.also tried other ferrari images but same thing also tried ie and firefox realy stuck on this one.any one from middlesbrough or know any companys etc .
umm.. so yours ferrari sim does it have the sticker on the bottom saying that m8 ..
if it has pardon me ..never heard of companys doing this before ..maybe a sat installer could help you out ..
lincsat
31st October, 2011, 02:51 PM
It could be that you have a firewall blocking the Network access to the box - You do have your PC connected to the same network as the box?
bph
31st October, 2011, 04:06 PM
yes can access router and modem but not box will have a go on other computer as have tried on two laptops with no success.i did mean satellite installers or repairers
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.