PDA

View Full Version : toyota avensis 2003 reading mcu immo



yusef
29th October, 2011, 11:27 PM
hi guys need tutorial in reading MC68H05E6, 28 pin mcu from avensis immo. , using omega programmer with mtrk adapter (as shown in module 85 in zed bull eprom applications)

my problem is knowing how to connect this 28 pin chip onto this adapter, as this mcu is lot smaller and which way round and should i solder to adapter.

all help appreciated
thanks

workdamnyou
30th October, 2011, 09:55 AM
Here you go mate...

yusef
30th October, 2011, 08:15 PM
Thanks
Pin1 ok but ic seems small
See attached photo

workdamnyou
30th October, 2011, 09:57 PM
Your immo data is in the ecu, not the antenna.

Immo is only in antenna when its a 28 leg HC05E6, older avensis.

Open ecu behind the glove box. Immo data will be in 93C56 or 96C66. It may be marked on the board as IC900.