PDA

View Full Version : xbox 360 freezing



starling
30th October, 2011, 02:20 PM
could some one help my xbox totally freezes when imm playin games its had new flash/updates but when i turn it off its ok again for awhile also had chip reseated/and a new clamp kit

micflair
30th October, 2011, 02:57 PM
could some one help my xbox totally freezes when imm playin games its had new flash/updates but when i turn it off its ok again for awhile also had chip reseated/and a new clamp kit

Im guessing its a old machine. If its had the RROD or E74 and its been fixed then it sounds like its on its way out again mate. I dont care what anyone says, there is no permanent fix for these problems. Ive fixed many of them in the past, but you always get some coming back.

If you had it fixed recently I suggest you take it back to the guy who did it and tell him its freezing. If not, then your gonna have to fork out to get it redone, or buy a new one..

starling
30th October, 2011, 07:50 PM
not had no rrod or any errors flash up

Fellianis Wig
30th October, 2011, 08:15 PM
not had no rrod or any errors flash up

It will do eventually its on its last legs

micflair
30th October, 2011, 08:17 PM
not had no rrod or any errors flash up

Huh? So why has it had a chip reseated and a new clamp fix? Sounds to me like its had the E74 error before. `chip reseated' sounds like a reflow to me, and clamps replaced is pretty obvious.. It must have had some problems before otherwise you wouldn't have had these things done mate..

cunny
30th October, 2011, 08:21 PM
I'd contact who reflowed it. As mc stated it sounds like a reflow has been done. Personally I'd bite the bullet and go get a new 1

starling
30th October, 2011, 09:34 PM
my soninlaw did it

starling
30th October, 2011, 10:03 PM
reason it had a chip reseat cause the chap who had it before
said the box was freezing

micflair
30th October, 2011, 10:11 PM
reason it had a chip reseat cause the chap who had it before
said the box was freezing

Yup, its been reflowed and had its clamps removed because it was on its way out.

When I have fixed a 360, if it goes again like yours is doing I normally tell them to throw it in the bin. Once they start to go again your wasting your money having it done again.. and again..