Antok7
31st December, 2008, 02:47 PM
Hi I could not find any codes for my area but i found these elsewhere.
I found these codes & instructions which were posted by Satsmo. so all credit to him, please.
I have added two codes myself.
I can only receive 86 channels in total , if anyone else finds more channels for this area please post.
You need to input symbol rate 6875 and manually install TPs for your area.
symbol rate- 6875
324
340
348
356
364
372
386.750
394.750
410.750
418.750
444
452
460
467
469
To add these frequencies you need to:
1. Press menu,installation,user installation. Use 1004 if asked for PIN.
2. Press green button for TP edit.
3. Press red button to add TP.
4. Enter frequency and symbol rate 6875.
5. Press OK, then repeat these steps until all frequencies have been added, one by one.
When they're all in press exit and go back to first page of install menu. Press the red button for auto scan/update channels. This will do a scan an all the frequencies entered.
:manuflag:
I found these codes & instructions which were posted by Satsmo. so all credit to him, please.
I have added two codes myself.
I can only receive 86 channels in total , if anyone else finds more channels for this area please post.
You need to input symbol rate 6875 and manually install TPs for your area.
symbol rate- 6875
324
340
348
356
364
372
386.750
394.750
410.750
418.750
444
452
460
467
469
To add these frequencies you need to:
1. Press menu,installation,user installation. Use 1004 if asked for PIN.
2. Press green button for TP edit.
3. Press red button to add TP.
4. Enter frequency and symbol rate 6875.
5. Press OK, then repeat these steps until all frequencies have been added, one by one.
When they're all in press exit and go back to first page of install menu. Press the red button for auto scan/update channels. This will do a scan an all the frequencies entered.
:manuflag: