PEUGEOT-CITRO?N- wiring diagram needed

[jo?o antonio]

H? guys, where can I find wiring diagram for peugeot and citro?n ,wiring for ECU , BSI, ....

I have Diagbox 5.29 installed in my pc, but not, no wiring.

My car is CITRO?N Picasso, year 2004, system Magneti Marelli - ECU is ( IAW 6LP1.43 ) engine 2.0 16v gasoline.

Some help ?

Thanks for all.

[paro44]

Wiring diagrams should be in the software Citroen Service Documentation Backup SEDRE.
Original factory software for Citroen vehices. It contains service and repair manuals, wiring diagrams, spare part catalogues. Documentation backup software and SEDRE backup software.

It exists for peugeot as well.

[brchip]

Guys, I need the pinout for the IAW 6LP1. What I need to know is which ECU pin is used for injector 2 and 3. Anyone please?

[ammarben]

try this schematic

[ammarben]

location of the epissure E132

[brchip]

try this schematic

Thank you very much! This is exactly what I was looking for.

Do you have the complete pinout for the ECU, by any chance? It would be great to have too.

Cheers!

[brchip]

Guys, I still need to find out which are the ECU pins related to the fuel injectors.

Ammarben gave me this figure:

http://www.digital-kaos.co.uk/forums/attachments/f154/87641d1320681683t-peugeot-citroen-wiring-diagram-needed-moteur-rfn.jpg

The injectors are: G2, G3, H2 and H3 but it doesn't show where they are located, there are 3 of them:

http://img820.imageshack.us/img820/9756/mm6lp120c.jpg

Anyone, please?

[brchip]

No one? Please help me.

[Zmann]

Not the same ECU but IAW for PSA, the 4 injector pins should be the same. They are on your photo right plug, see how to ID the pins.

[brchip]

Not the same ECU but IAW for PSA, the 4 injector pins should be the same. They are on your photo right plug, see how to ID the pins.

Thank you! So the pins for the injectors are G2, G3, H2 and H3 on the right plug, plug 1? Correct?

[Zmann]

Yes, your photo right plug is plug1 to mine. Injector2 should be G3 and Injector3 should be G2

Is the ECU opened?

[brchip]

Yes, your photo right plug is plug1 to mine. Injector2 should be G3 and Injector3 should be G2

Is the ECU opened?
What do you mean by opened? I'm trying to fix it, the injectors 2 and 3 are not working, I think I need to replace the L9131 chip, right?

[Zmann]

I mean you open up the ECU. You saw L9131 that might be already open. I am looking for the good high resolution photo to all parts of this ECU. It's would be nice if you can take it.

[brchip]

I mean you open up the ECU. You saw L9131 that might be already open. I am looking for the good high resolution photo to all parts of this ECU. It's would be nice if you can take it.

I have taken some, what are you looking for? Whole thing or a particular detail? Let me know if you want some detail.

http://img824.imageshack.us/img824/2467/mm6lp120a.jpg

[Zmann]

Very nice high resolution photo, thanks. Can you help to confirm the power components no. from left to right are L9132, VB026MSPx2, what of these two TO-252?, TLE6209R and L9131

[brchip]

Very nice high resolution photo, thanks. Can you help to confirm the power components no. from left to right are L9132, VB026MSPx2, what of these two TO-252?, TLE6209R and L9131

Correct! The 2x TO-252 are VND7N. Anything else you want to know? Just ask.

Do you have the pinouts for this ECU, I mean, how to connect this to the ECU simulator?

[Zmann]

Sorry, none of them. I was using the attached file 'for 48P2xx' to refer your injectors pinout, it's of three-row plugs instead of your four rows but maybe it helps a little bit.

[jo?o antonio]

H? guys , some help for me ?

[brchip]

H? guys , some help for me ?

I'm looking for the same info, found nothing so far. Why is it so hard to find it?

[jo?o antonio]

I'm looking for the same info, found nothing so far. Why is it so hard to find it?
-----------------------------------------------------------------

It is an old car !!!!!!!
Thanks.

[brchip]

-----------------------------------------------------------------

It is an old car !!!!!!!
Thanks.

Yes, but newest cars are usually harder to find info. Where are you from?

[jo?o antonio]

Yes, but newest cars are usually harder to find info. Where are you from?

-------------------------------

BRAZIL - RIO de JANEIRO ( south american )

Thanks for all M8.

[paro44]

H? guys , some help for me ?

Have you read my post? SEDRE is the wiring program for pug/cit (with doc backup).

[jo?o antonio]

Have you read my post? SEDRE is the wiring program for pug/cit (with doc backup).

-------------------------------

Ok mate, the hard drive of my PC is full , not install SEDRE.

[brchip]

Have you read my post? SEDRE is the wiring program for pug/cit (with doc backup).

Where can I find this SEDRE m8?

[brchip]

Guys, I replaced the L9131 chip that was supposed to be faulty but still get same problem, injectors 2 and 3 not working! I suspect it's a different driver for the injectors, but without the ECU pinout I'm in the dark here.

Any help would be aprecciated!

[paro44]

Where can I find this SEDRE m8?

As always try filecrop: (Sedre - Download (http://filecrop.com/search.php?w=sedre&size_i=0&size_f=100000000&engine_r=1&engine_m=1&engine_h=1))


@ jo?o antonio
Maybe its time to add/replace harddisc ;-)

[brchip]

As always try filecrop: (Sedre - Download (http://filecrop.com/search.php?w=sedre&size_i=0&size_f=100000000&engine_r=1&engine_m=1&engine_h=1))


@ jo?o antonio
Maybe its time to add/replace harddisc ;-)

WOW...huge!

[jo?o antonio]

H? guys , Thanks for all M8 .

Problem solved .

[brchip]

H? guys , Thanks for all M8 .

Problem solved .

Good for you. I still can't figure what's wrong with my ECU. Injectors 2 and 3 are not woking even after replacing L9131 chip.

Any ideas?