PDA

View Full Version : TOYOTA /PEUGEOT 107/CITROEN C1 ECU HELP



EssexTech
1st November, 2011, 01:30 AM
HI PEEPS

I NEED TO FIND A WAY OF REMOVING THE IMMOBILISER FROM S/H ECUS FROM THESE CARS. I AM PLACING A 107 LUMP IN A PROJECT CAR AND ALTHOUGH I CAN GET THE IMMO BOXES AND KEY SET . IT WOULD SAVE ME A LOT OF TIME AND HASSLE TO GET THE IMMO OFF.

CAN ANYBODY HELP WITH WHAT HARDWARE I WOULD NEED AND SOFTWARE I WOULD NEED TO DO THIS AS THIS MIGHT BE REQUIRED FOR MORE THAN 20 ECUS

keygargoil
2nd November, 2011, 02:51 AM
no9 immo off for aygo, 107 and c1 just make new key to immo box thats all

bram380
2nd November, 2011, 02:53 AM
Read your immo box.
Read key data.
Post here both files.
I think DK's member will help you.

darius89
6th April, 2012, 10:57 PM
whats right chip should be ......
4d id 67 or ?????

xariton
7th April, 2012, 02:10 AM
It may be 4d id 67, 4d id 68, 4d id 70 for avensis, may be 4c, it info about Toyota

darius89
7th April, 2012, 10:19 AM
I tried 4d67 on aygo and on c1 but no success. Used tested virgin immobox. And I dont know what to order .....

bram380
7th April, 2012, 12:14 PM
4D67 have code pg1. 32, 33, 52, 53, 72, 73, 92, 93, etc.
If chip wrong code, immo reject & cars won't start.

darius89
7th April, 2012, 09:35 PM
for c1 I used 4D 67
32 4A 048A0415
WITHOUT SUCCESS

polycell
7th April, 2012, 09:54 PM
no sharing on this issue

achaccha
8th April, 2012, 12:25 AM
Your question is very generic, I think you need to target your questions about any specific case.
indicate that ECU wants to work, post the code of the ecu, vehicle, year, model.
you need a good information for effective help.
regards

bram380
8th April, 2012, 02:34 AM
Your question is very generic, I think you need to target your questions about any specific case.
indicate that ECU wants to work, post the code of the ecu, vehicle, year, model.
you need a good information for effective help.
regards


Your true friend ...
Clear and accurate data will help resolve correctly.

darius89
8th April, 2012, 03:24 PM
Thanks for comments .. ) but I think my question is clear..
WHAT CHIP USED IN C1, P107 AND AYGO
AND all C1, P107 and Aygo have same ecu and immobox.
And Im asking for info from guys who have expirence with that cars.
Sorry.......

workdamnyou
9th April, 2012, 06:51 PM
Any of the Aygo's / C1's we've done have been Page 1: 53 or 33. So thats ID70.

Sorry, but dont know of any immo off solution.

keygargoil
10th April, 2012, 12:58 AM
they are all id70 you wont find an aygo, c1 or 107 with id67
i make these all the time

darius89
13th April, 2012, 06:47 AM
hi, I used tested virgin c1 immobox bin file and 4d70 glas type, and cuoldnt program vith ssb, lexia, t300. Ant did ecu>immobox matching 30min.<
I has 1 error. >Wrong transponder key <, after programming I have> immobox not recognised<
But interestig one, that after oll job I removed immibox ic 24c04 .... ant it was untouched, nothing changed, same virgin. where my mistake...

koncimobil
13th April, 2012, 07:42 AM
Maybe transponder glass type not programmed.
If dump virgine, syncrhone with toyota procedure will be ok.
Better option upload dump ori & virgine.