citroen xsara2 2.0 hdi sid801 immo off

[luisitoeik]

hi m8s,

please i need immo off, 4this car

citroen xsara2 2.0 hdi
with bsi,,,

please someone,,,???

:(

thanks in advanced,,,

LGO

[oem]

try and report

[luisitoeik]

thanks m8,,,

:(

show this pic

what now???

please ,,,,

thanks in advanced,,,


LGO

[oem]

try with only eprom.

Here - another dump

[luisitoeik]

hi, oem

I forget to mention something, inyectors didnt have pulse, I think because no have autorization to start, because calculator is not matched, ok, now is matched with the file sid_ok,,,

but u are the master,,,

I think we are close,

please show the pic again please,,,
now the pic say
item 1,,,say calculator locked; it may say: calculator no locked
item 2,,,say calculator matched this ok,,,
but
item 3,,,it may say, no problem,,,and say waiting for reply of BSI

thanks in advanced,,,

greetings from Paraguay,,

LGO

[oem]

You must reconfigurate ecu. Now car must start with limit to 2500 rpm. You have start permission?

[luisitoeik]

no, I dont have start permission,,,

:(

and I can not reconfigure the ecu, because there is some kind of conflict in the car that doesn?t let me even erase the fault codes. I already virginise the ecu also, but when I want to bond it with the BSI, I get an error also. This is why I wanted to try to put IMMO OFF in the ecu. Only in the ecu, I cannot erase the fault codes, all others no problem. Actually the cars original problem was that it can not go pass 2500rpm, due to a faulty High Pressure Sensor (on the rail). Then this car went to other garages, and now to me.

thanks in advance,,,

L

[oem]

This fault you have after trying to start. After 10 sec ecu write error for pressure regulator. Maybe you have not problem with regulator. Only immo. Try with original eeprom and immoff by flash from my dump.

[luisitoeik]

thanks m8, 4everythink,,,

now I have start permission, work ok, the problem is only the regulator or 2500rpm limits,,,I will try put the original eprom with u flash,,,
thanks again

Luis