2008 porsche cayenne. help

[AMLGAR]

hi, guys after clear crash in this car, i have some problem s 2 codes no way no clear it any solutiuon will be apreciate

code 2688 AWS CALIBRATION REQUIRED

code 2511 AWS CONTROL UNIT, this two in airbag ecu


AND AWS ecu, only 2511. :embarassed:

[AMLGAR]

any idea guys thanks:giveup:

[mcm44]

Did you try to do the AWS calibration?

[AMLGAR]

i try with x431 error no comunication, but no success, you think i have to try PIWIS, u think o u know if DURMETRIC(cheaper):giveup: has that option i look online but i can find out. THANKS

[mcm44]

I think that even VCDS should done this job. SRS system in this Cayenne is like in Touareg...

[AMLGAR]

VW Touareg (7L) (http://wiki.ross-tech.com/wiki/index.php/VW_Touareg_%287L%29) 2003 - 2010

Basic Setting
Seat Occupied Recognition Control Module (J706)

If the Seat Occupied Recognition Control Module (J706) or the seat itself have been replaced, the basic setting has to be performed.

[Select]
[15 - Airbags]
[Security Access - 16]
Enter 30475, to enable the basic setting.
[Do it!]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The reset has been performed.

If a repair on the Seat Occupied Recognition has been performed, a reset has to be performed too.

Prerequisites:

* Seat in normal position.
* Seat must NOT be occupied during the whole procedure.
* Seatbelt must NOT be plugged in.
* No faults in the system.
* Interior temperature must be between 0 ?C and 37 ?C (32 ?F and 98 ?F).

[Select]
[15 - Airbags]
[Security Access - 16]
Enter 30475, to enable the basic setting.
[Do it!]
[Adaptation - 10]
Channel 000
[Read]
[Save]


i wil try , like the manual , THANKS i will post results