View Full Version : audi 80 bosch 0 281001316/317 immo off
plays
9th November, 2011, 05:52 PM
What do I have to delete the code read?
in some places say they read the 93c46
in others the 27C512
what I read??
http://img408.imageshack.us/img408/6635/100d0013.th.jpg (http://img408.imageshack.us/i/100d0013.jpg/)
http://img408.imageshack.us/img408/6635/100d0013.jpg
klakier
10th November, 2011, 09:41 AM
read 2 x 93c46
irodum
13th November, 2011, 09:43 PM
Green Motorola transponder box and post here
Youneselm
13th November, 2011, 11:09 PM
READ DUMP AND POST MATE? MAYBE WE CAN HELP YOU OUT;-)
plays
15th November, 2011, 04:45 PM
read 2 x 93c46
this is file of 93c46 read at 16 bit n?2.
thanks very much
uliasz
15th November, 2011, 05:11 PM
Turn off immo in memory left (looking from the front of the driver, the one closer to the connectors, because there are two on the left),
Right eeprom not read (do not move)
Example files:
plays
15th November, 2011, 05:22 PM
Turn off immo in memory left (looking from the front of the driver, the one closer to the connectors, because there are two on the left),
Right eeprom not read (do not move)
Immo off: in left dump memory: Lines 015 to 03F fill 0.
Example files:
thanks the memory left is the b58196 n?2 as picture in ring red???
thanks
uliasz
15th November, 2011, 05:27 PM
Yes. Compare content on this memory of mine, should be similar for certainty
plays
15th November, 2011, 06:51 PM
dont'go. i have modifiy the file but dont go
uliasz
15th November, 2011, 07:35 PM
Before start car you must disconnect immo box. Modify eeprom, disconnect box and try. It's worked :) . Tested a few car
plays
15th November, 2011, 11:12 PM
I'll try tomorrow. I ask too much if I ask you if you try to edit the file so that so the comparison to my?
thanks so much
klakier
16th November, 2011, 08:19 AM
this is file of 93c46 read at 16 bit n?2.
thanks very much
your file off
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.