VW Sharan VW61 1C0909605F 5WK43131 crash

[Shmortz]

Help to clear crash on
VW Sharan
1C0909605F 5WK43131 VW61 index03

[kiriki6969]

dump corrupt not valid.
Motorola MCU 68HC912.

[Shmortz]

dump is ok read by K-line on the desk with two difirent softwares, just there is offset of adresses, adress 0 is equal to 100 readed with programmer...
I try to clear allready, after that no DTC's even on the desk but the airbag light is always on on car and again no DTC's

[mlulic]

See coding airbag modul

[Shmortz]

coding is OK, there is other problem but I can't find out what

[cristi_onofrei]

coding 12357?
you have mechanical front seat belt ?

[Shmortz]

yes, that's write

[cristi_onofrei]

clear crash before write

[Shmortz]

problem is solved, I found another module exactly the same coding as what you sent. I recorded on it clean dump from my unit and work without problem.

[coach66]

Help to clear crash on VW61 1C0909605F (http://www.digital-kaos.co.uk/forums/f170/vw-sharan-vw61-1c0909605f-5wk43131-crash-237833/)

[darwins]

Ford Galaxy
1C0 909 605 F
5WK4131
Coding: 12357

Hello Guys

Can some one help with a tested good file for this module ?

My unit is corrupt no coms, I have tried the crash file at the start of this thread but always have crash data or end up with no codes but light on, no matter if cleared with CarProg or Cartool etc..

I tried other variants but can't find coding 12357.

Any help very appreciated.

Regards

Darwins


I have been helped by DK Member my help request is closed...

[Shmortz]

here is 2 good dumps, if not working replace unit