PDA

View Full Version : Boot Mode - Renault Delphi DDCR



InfoPerformance
10th November, 2011, 05:41 PM
Hello. I have a problem with this car.

I need the boot mode for this ecu.

Renault Scenic 2 - 1.5 DCI - DDCR - With Galletto Original

In the documents there is this picture but my ecu is not equal, it 29F200 flash but do not have those points to make the boot mode. Please I need help. Thank you.

I need to correct the checksum, because I winols corrects the checksum.

frenchdealercommender
10th November, 2011, 09:06 PM
hello
post picture of your ECU insid

3abas27
14th November, 2011, 08:51 PM
hello
post picture of your ECU insid

me also i have some problem if some body can help for reding flash via obd with galetto ?

InfoPerformance
19th November, 2011, 04:46 PM
Problem solved. I read the ecu for obd.

thanks.

jovime
19th November, 2011, 05:37 PM
Just make boot on processor pin. Pinout for the C167 processor is the same, no matter in wich ECU it is.

SergejVita
19th January, 2012, 08:24 PM
InfoPerformance:"Problem solved. I read the ecu for obd."------how the problem is solved?? Share please??

Markopolo
11th March, 2012, 12:50 PM
Hello.
Which tool read/write full flash(256K) from Megane 2 1.5dci DDCR Delphi Ecu?