View Full Version : Honda Pilot 05 Dash - rear circuit pinout
habs44
10th November, 2011, 10:20 PM
Hi, Does anyone have the circuit pinout for eeprom on an 05 Honda Pilot
(it seems to be different than 04 and 07)
Thank you!!
martij976
11th November, 2011, 03:31 AM
Try:
CL8 - 1
CL11 - 2
CL9 - 3
CL10 - 4
Looks similar as 06.. Same testpoint nrs..
Let us know.
habs44
13th November, 2011, 08:36 PM
what about pinouts for pins 5 & 8.. I really want to avoid taking off the needles..
Thanks!
digimile
13th November, 2011, 09:52 PM
hi
check these connections and let me know if these are good for these boards
thankx
Speedosoft
14th November, 2011, 08:09 AM
I'm not so sure that #8 is correctly shown but I'm 100% sure that it's on the small track marked CL1. #5 of course is correct.
prckybgd
29th August, 2012, 04:16 AM
2003 HONDA PILOT (USA) with 93C56 eeprom chip
this pinout is for any eeprom adapter.
I use USA Prog with eeprom adapter but you can use this pinout for any standard eeprom programmer.
Good Luck!
If you need eeprom dump for this chip, let me know I will email you
visavis88
21st January, 2021, 08:49 PM
2005 Honda Pilot (USA).
Done with original UPA using 3.3V to read and write 93C66.
used photo from digimile with added points for the UPA, if someone needs.
778829
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.