Mercedes Vito 639 2.2cdi FAP DPF problem

[pelot]

Hi!
4 months ago i'm removed DPF from VITO 639 with ES2.0, everything was ok, car was driving well about 10000km without any troubles. And now (4months later!) we have limp-mode without any error massages in ecu. ES erase all. Can anybody edit dump more correct or have another solution? All ori bdm in attach, Thanks!

[grinovsky]

ecusafe don't erease all,it erease only DTC table relatif to differentiel sensor,if you get limp mode with no DTC that mean that you have probleme differentiel sensor circuit
you can check this by yourself
disconnect any ather sensor and scan your ecu,you will find DTC that repport to sensor disconnected by you
regard's

[pelot]

Sure, grinovsky,first i try to disconnect EGR and MAP - no errors(i'm using KTS&DAS), and then and I thought about ES. But at monday i try a new DPS, thanks.

[alexs307]

Put original file and make diagnose. DTC table is gone in Ecusafe file.

[pelot]

2 weeks. 1000km. all ok. New DPS. grinovsky, you are the MAN! ))

[grinovsky]

Put original file and make diagnose. DTC table is gone in Ecusafe file.
MAESTRO
http://i43.servimg.com/u/f43/16/03/79/30/gif-im10.gif

[alexs307]

Pelot: "Sure, grinovsky,first i try to disconnect EGR and MAP - no errors(i'm using KTS&DAS)"

You were just lucky, MAESTRO, it could have been any other sensor...You and your powerfull DPF removal tool.

[pelot]

Peace, gentlemens )) Really no errors with disconected EGR.

[grinovsky]

ecusafe don't desactive EGR,but disable DTC table of DPS and EGR:D