Peugeot 406 immo-off

[abuuauto]

Hi, memmbers please l need immo -off for peuget 406 .2.0.model 2001 .petrol.manualy with ecu magnetic marelli no IAW 4MP.11 .PRN4AD2C 043 01..with eeprom AM 29F200BB.this original file from ecu ,please any can help

[abuuauto]

hi, members any help please of file peugeot thanks

[abuuauto]

hi,members am stuck and this car it just change bsi it was broken l change for swap file and car could start any more please any idea, member thanks.

[knok]

hi,members am stuck and this car it just change bsi it was broken l change for swap file and car could start any more please any idea, member thanks.
I'm afraid you must reprogram your BSI using PPS , is not so complicated , you just need PIN and some patience.
Your ecu have inside cpu HC05P18 ?

[InfoPerformance]

POst the dump bsi, I tell you the code and coding the BSI as new motor home with the ecu.

[abuuauto]

hi, please l dont have pp2000 .i think only option it immo-off it possible for immo -off?. members any idea .thanks

[umoussa]

this can be made off by programming the flash dump and cutting some pins

[abuuauto]

ok .thanks .please can help for file and which pin l must cut off ?.

[abuuauto]

hi, some he give file for immo -off ecu magnetic marrelli on 29f200bb. but after write in file bend pin f4,f3 car it could start .so i put back original file on ecu .but now ecu it come on and even throttle body .what stranger this 2 ecu dead same time after read file and put back original file on 29f200bb. this type of ecu magnetic marell nono IAW 4MP.11 and other IAW 4MP2.2 any idea of this ecu ?. thanks

[s0liver]

I am from Croatia and shearch map for my peugeot 406 hdi brek 110ps map name:0281 001 977

thanks

[abuuauto]

hi, l got pp2000 please l can use used bsi and used ecu on car .to programing
bsi ?. how is procedure to program bsi and ecu and which type of chip it need on this type 406 ,model 2001.2.2 .petrol vin
VF38BRFRE80985048 .thanks