Citroen Jumpy 1.6 HDI 2008 BSI IMMO CAR not STARTING

[bursuc]

Hello,

I need some advice here, the car is a citroen jumpy from 2008.
The car has stop working while driving, i make the BSI reset procedures but still not starting.
I open the BSI wich has the following numbers on it :

96 637 983 80
BSI 2004 P07 - 00

ECU: EDC 16CP32

I check all fuses and all are ok ( i found two of them burned but i change them)

I open the BSI and found a BURN circuit on the board.
If someone know the burned circuit is between two plugh.
The White one and the BLUE one.
Any ideeas why the car stop working, right now i am making progress to make the BSI work again , hope this will WORK.
But anyways there is a sollution to make IMMO OFF ?

Thanks all in advantage

[ammarben]

you can make it immo off
post your dump

[bursuc]

you need dump from BSI or dump From ECU ?
Thank you

[ammarben]

photo of ECU

[bursuc]

Here is dump from ECU :
95160 IMMO ON

Need IMMO OFF FILE, i quit repairing the bsi because is easyer to make immo off.
Everything else is working apart from immo .

Thanx and do i need to cut something ? or i need to make write prottect ? and if yes , how ?

[ammarben]

take it your immo off file

[bursuc]

hi, thanx for dump , i write it in 95180 but still not working, your dump is 100% ok? i need to write prottection ? or anything else? i am trying tomorrow to open the BSI to see what circuit is burned inside... any ideeas are welocome. thank you

[bursuc]

SOLVED - The car is starting thanks all

[knok]

SOLVED - The car is starting thanks all
and how was happen that ?

[bursuc]

the car is starting with this immo off file, tested and working.
The injection pump had air on pipes aswell....thats why didn't start for the first time.
Now i checked with the key with transponder and without transponder and it is starting everytime :)
Thenk you !