PDA

View Full Version : HHHEEEELLLPPP



scotti81uk
2nd January, 2009, 08:12 PM
Hi,

I have put my dream box on and it has more channels. Does anyone know how this has happened. but no although channels like BBc are showing i am unable to view them. it is just a blank screen. Is this due to something between my satellite and Dreambox?
My freesat box in another room has more channels than my Dreambox too. There seems to be a wider variety of satellites to aim at with the Freesat box. for exp Astra 1F?

I am real stuck with my Dreambox. I have the image on it. I do not have a clue how to get the codes onto it. I would like to know the benefits of connecting it to my PC. It is but again I do not have a clue how either the PC or the Dreambox recognise this?

I keep reading that the box can do certain things, but I could really do with some guidance if anyone can assist me please?

I am getting a monoblock LNB. This is so that i can get Hotbird and Astra. Are there benefits here?

Please any help would be appreciated,

alunfennell
2nd January, 2009, 09:34 PM
JUST GOT A DREAMBOX
Here is a few tips to get you up and running

WHAT WILL I NEED….?

First of all there are three pieces of software that you will need

DREAMUP
This software is an essential piece of software if ever you crash your box you will need this to get it up and running again with a NULL MODEM CABLE, the cable costs around ?5 and can be purchased at any maplin store in the UK or any good sat store should sell them, they are also available on ebay.

FLASH WIZARD PRO
This software is used to install an image onto your dreambox, after you have installed your first image with dreamup, once you have installed the image you can also back the image up with this software, this is handy if any think goes wrong with your unit you have a back up image that you can put back on.

DCC
Dreambox Control Centre this software is used for putting cams & keys onto your unit and editing files etc.

HOW TO FOR BEGINNERS

Installing your first image

I always use dreamup for this connect the null modem cable to a com port on your pc then to the com port on the dreambox, untick the use network box at the top left of the page then click on connect, you will see the job status-progress bar fill up blue then it will ask you to turn the unit on saying connection prepared, at this stage plug the power cable into the unit.

Now you are ready to install your first image, but what I do is erase the firmware that’s already on the unit so click on erase, after about five minutes you will get a box come up on the screen with erased RESULT SUM =0

Now click on flash, you will get a browse option so tell this where the image is that you want to install i.e.: C:/mydocuments/ where ever the image is saved on your pc, select the image and press ok.

Now you will see the percentage bar start to fill on the job status progress, this takes about 15 minutes to complete. DO NOT remove the cable until you get a box come up with image installed RESULT SUM=0. after this you can unplug the mains and null cable from the unit.

Now your heart is racing to get it connected to the dish to see if it works.

Connect the lnb-scart-ethernet cable if you are using a router and the power cable last it may take a couple of minutes before you see any think on the screen.

The first thing you will see is a settings for your tv with PAL in it, press the green button on the remote to save this setting, now it will ask what language you want to set the box to, select your language then press ok, after this you will see starting common interface on the screen then the screen will change to satellite configuration with three options choose the option for what setup you have, once you have chosen your setup the screen will change if you have chosen a simple method you will see a bar with a satellite highlighted press ok on that and choose the satellite that your dish is point at and press ok, now you need automatic transponder scan, once you are on that select the satellite you want to scan press ok and it will find a valid transponder if it is a fixed dish, you will see a tick in the lock & sync and it will say a valid transponder as been found now press the green button on the remote to scan all the channels in.
If you have chosen the complex method you will see the next page saying many satellites via DISEqc rotor press the green button on the remote the next page you will see motor config untick the goto XX function then press the blue button on the remote this page is another motor config page on the left of the page you will see Mode: Satellite: Transponder: Direction: highlight the satellite bar then press ok on the remote, select a satellite for instance Hotbird and press ok then the transponder should already be highlighted press ok and select a strong transponder on Hotbird I use 11623/27500 V after you have selected the transponder press the down button on the remote to direction, now with the left & right arrow buttons on the remote you can nudge the dish east or west to that transponder, once you hit that transponder you will get an X in both lock & sync now press the green button on the remote to store that position in the motor settings, once you have pressed the green button you will come back to the same page again this time press the blue button on the remote transponder scan, select automatic transponder scan and press ok now you will see another page SNR AGC bars will be pretty full with a lock & sync and the top satellite will be highlighted scroll down to the satellite you have just had lock & sync on and press ok, it will say a valid transponder as been found now press the green button to scan in the channels.

The same procedure for other satellites.


HOW TO INSATLL A CAM

This is where the software DCC dreambox control centre comes in, the default name and password on a dreambox is Name = root Password = Dreambox open the software and select your language and choose the connection type for this I choose router, now you will see three pictures the PC – DREAMBOX –ROUTER with a thick line going to all of them, put your IP address of the router in the router for instance 192.168.1.1 if this is the correct IP the thick line will change green from the router to the pc, and it should put the pc IP in automatically leaving a red line to the dreambox, leave this software running, now go to menu on the remote and select setup then expert setup press ok on expert setup then ok again on communication setup, on the top right you will see a box with DHCP with the left or right arrow go up to this highlight it and press ok you now have a tick in the box also make sure the enable network box is ticked after this press the green button to save then exit back to a tv channel, when on a tv channel reboot your dreambox after its rebooted press setup then expert setup press ok on expert setup then ok again on communication setup and you will se the IP address of your dreambox, make a note of this and go back too DCC enter your dreambox IP in the dreambox part now you should have a thick green line to the PC-DREAMBOX-Router and exit DCC software.

For instance you have installed a Gemini Image, All the things you need to update your image are contained in the BLUE BUTTON. You can see this by pressing the BLUE button on the remote control & scroll down to addons, once you have selected addons press ok on the remote then scroll down to DOWNLOAD & INSTALL press ok again now you have all the downloads on the screen, the 1st one you see is CAM press ok then you will see all the cams that are available to download, scroll down to the cam you want to download then press ok on the remote, it should download very quick then you get a screen saying ready to install press the green button to save, and complete the same process to download further cams.

DM500 users like myself no more than 2 cams

The two I use are: - Cccam 2.0.11 on Darkstar 2

VAR FILE
By pressing the BLUE button on the remote control & scroll down to addons, once you have selected addons press ok on the remote the 1st addon you see is SETUP, press ok on setup this will show you how much free space and how much used space is in your var file.


AUDIO SETUP
By pressing the BLUE button on the remote control & scroll down to QUICK BUTTON SETTINGS, once you have selected quick button settings press ok on the remote then scroll down to audio and press ok, once you have pressed ok it will return back to quick button settings exit out of that now you should be on a channel, press the yellow button on the remote control and you will see what audio language is available for that channel select English * away you go.

Download Tools Here....
DreamBoxTools V4.0
Up to date Version 4.0 for everyone that is Interested in using this suite.

1-DreamUP V1.3.3.2
2-DreamBoxEdit V3.0.0.0
3-Dreambox Control Center v2.95
4-bitcontrol? MPEG Decoder v3.0 (MPEG-2, H.263, MPEG-4)
5-bitcontrol? Digital TV Link v3.0
6-DVR-Studio Pro v1.56
7-Screenshot Tool v1.71
8-NFS Server v4.3
9-VLC media player v0.9.6
10-FLASHWIZARD v6.3
11-On2Share Pro v4.3.0.7

h**p://www.sendspace.com/file/uqbr2x

Regards:
Alun

scotti81uk
2nd January, 2009, 10:12 PM
Thanks for this,

I have run through most of it and have put the Digital Chaos image onto my box, so it is up and running. It is from here that I am getting problems.

I have Dreambox Contol Center but it is all in German.

What benefits will it have hooking my box into pc? Also can i get 3pm football matches from hotbird when i have the satellite set up?

thanks again

alunfennell
2nd January, 2009, 10:33 PM
With DreamBoxTools V4.0 you will have Dreambox Contol Center (DDC) in English, I have never used Digital -Kaos Image ( Sorry Devilfish) I like using Nabilosat Darkstar 2 Image because once you set up the communications port you can download Cccam & Keys directly to the receiver using the remote control

There is less and less open in the way of channels due to the switching over of providers using Nagra2 encryption for Nagra3 & N*s which have not been hacked.

For Football nearly all of us are using Digitv on Thor @ 0.8 west (Nova Sport) which has three live matches every Saturday followed by as many matches again on Sunday all in English if selected.

You have to connect you Dreambox to the Internet via a router to have any chance of receiving Encrypted channels, there are two methods to decrypting channels one of which we are not allowed to discuss on the website the other I have already outlined to you in the above regarding Cccam & Keys

Regards:
Alun

scotti81uk
3rd January, 2009, 02:50 PM
Thanks for the help.

I appreciate it, This gives me some stuff to be getting on with.

To get the Thor Satellite, will i need a motorised Dish?

Cheers again

thered
3rd January, 2009, 02:53 PM
no you can have a fixed dish to get thor but i would recommend a motor to get the most from your dish

C64
3rd January, 2009, 02:58 PM
I have never used Digital -Kaos Image ( Sorry Devilfish) I like using Nabilosat Darkstar 2 Image because once you set up the communications port you can download Cccam & Keys directly to the receiver using the remote control


DK1.1 supports this as well mate. :)

I've been a Nabilosat fan for years, DK1.1 is the 1st image that has swayed me.

Louiz
3rd January, 2009, 05:26 PM
Hi anyone can help? when i try to click connect on the Dreamup, a message said" unable open com-port,aborting". I have my null cable connected.

shady77
3rd January, 2009, 05:30 PM
is your box unplugged when you try to connect? have you selected "com1" in the drop down?

Louiz
3rd January, 2009, 05:37 PM
i have selected the com1 already

Louiz
3rd January, 2009, 05:41 PM
But the same message still apear" unable open com-port,aborting". I have my null cable connected.

Louiz
3rd January, 2009, 06:00 PM
But the same message " unable open com-port,aborting". I have my null cable connected. still cant connected.

scotti81uk
3rd January, 2009, 06:23 PM
no you can have a fixed dish to get thor but i would recommend a motor to get the most from your dish

Thanks,

I will have to point my satellite in that direct though i presume. This will mean that I will lose Astra and Hotbird?

Is it easy to set up a motorised dish and isi t user friendly in terms of switching between satellites?

sevensheaven
3rd January, 2009, 09:43 PM
thnx this helpt for me

regards stef

peddean
3rd January, 2009, 11:42 PM
thanks for the clear explaination