toyota picnic add key

[KILL_THE_IMMO]

hi all
i need to add a 4C key into immobox 98780 44020
IN THE FOLDER
ORIGINAL DUMP
KEY DATA
ADDED KEY DUMP NOT WORKING
THANKS A LOT FOR ALL:giveup:

[bram380]

Cars: Toyota Picnic
Years: 1996-2001
Frame model: CXM10, SXM10
Immo box: 89780-44020
Transponder: 4C

[KILL_THE_IMMO]

I WILL TRY IT TOMORROW
THANKS MY FRIEND

[KILL_THE_IMMO]

sorry ur dump dont work

[KILL_THE_IMMO]

it is a tokai rika immobilizer

[vanos batam]

hi all
i need to add a 4C key into immobox 98780 44020
IN THE FOLDER
ORIGINAL DUMP
KEY DATA
ADDED KEY DUMP NOT WORKING
THANKS A LOT FOR ALL:giveup:

seems your added key is correct
but should work with key2 added.
if not working,chek pls your device,maybe your transponder amplifier problems

[bram380]

try again:

[KILL_THE_IMMO]

i will try
i use to program it 16 OR 8 BIT,,???

THANKS

[bram380]

use 8-bit.
But best way you have 2 eeproms,
first eprom for programmed 8-bit,
2nd eprom 16bit.

[KILL_THE_IMMO]

always not working
i think that i must use tpx1 with zedbull

[bram380]

upload original dump 8bit & 16bit.
it mean before key added

[KILL_THE_IMMO]

THIS IS 8 BIT ORIGINAL DUMP

[KILL_THE_IMMO]

ISNT POSSIBLE THE INVERSE OPERATION---> EDIT 4C DATA FROM THE DUMP,,????
NOTE I USE ZEDBULL FOR IT
CREATING IMAGE FFILE AND AFTER LOAD IT TO PROGRAM KEY AND AFTER LOAD THIS IMAGE DUMP INTO EPROM
IS IT CORRECT???

[bram380]

THIS IS 8 BIT ORIGINAL DUMP

key from this dump:
TIRIS Data: 7E A6 92 7A 02 00 00 00 00 4B 9E 7E


use proper tool for professional job:captain:

[KILL_THE_IMMO]

i m using zedbull isnt enought!!!!!

[KILL_THE_IMMO]

gazoil unable to injector

[KILL_THE_IMMO]

i tryed with 16 AND 8 BIT BUT CAR DONT WORK!!!!!!!!!!!!!!!

[bram380]

try, try, and try with other trick.
eg. swap 8bit, 16bit, all bit, keydata or sync data.

i can give you "fresh fish",
but how to get fresh fish is more important.

[richard27]

tpx1 chip will work with this tool 4c may not work

[keygargoil]

hi all
i need to add a 4C key into immobox 98780 44020
IN THE FOLDER
ORIGINAL DUMP
KEY DATA
ADDED KEY DUMP NOT WORKING
THANKS A LOT FOR ALL:giveup:
here is your dump key added 100% correct

[KILL_THE_IMMO]

tpx1 chip will work with this tool 4c may not work


not working with tpx1 also :(

[KILL_THE_IMMO]

i thing it have a mecanic problem because costumer find his key and after writing original dump into eprom car dont work
( with diagnostic tool it write me no problem)
pfffffffffffffffffffffff

note i should use 8bit to program key with this car i read eprom tiris forma and original dump (no inverse)