PDA

View Full Version : BDM can not read VW Crafter 2,5tdi year 2007



Harrycz44
27th November, 2011, 08:22 AM
Hello I can not read VW crafter 074906032s

hw00015318799506 edc16cp

___0281012950

I have clone BDM but another ecu read without problem...

alexs307
27th November, 2011, 09:50 AM
The car starts if you put ecu back?

Harrycz44
27th November, 2011, 11:16 AM
yes start, I have with this car big problem, to car go to much petrol I think that is software broken. But I can not read.. maybe try read with x-prog?

alexs307
27th November, 2011, 11:24 AM
It may sound silly, have you tried on OBD?

Harrycz44
27th November, 2011, 11:32 AM
It may sound silly, have you tried on OBD?
With MPPS but not sucesfully - flash by K-line but obd socket pin7
is free. I read on DK many problem with MPPS and crafter

ecutuners
27th November, 2011, 12:02 PM
You can flash with mpps if your mpps is good clone working on CAN

Harrycz44
27th November, 2011, 02:43 PM
my MPPS dont read it. But why dont read it BDM?

macxlulu
27th November, 2011, 02:49 PM
all mpps not read crafter edc16
only read cmd orginal (moreover, only a few months)
http://www.cmdtec.it/release_CMDFlash.asp

china bdm only read in dimsport software

must use dimsport software to read crafter

chli1976
27th November, 2011, 04:30 PM
china bdm only read in dimsport software

must use dimsport software to read crafter

I have read a crafter with cmd soft

macxlulu
27th November, 2011, 04:55 PM
I tried 1255 and 1251 and never has succeeded but dimsport work ok

ecutuners
27th November, 2011, 09:42 PM
Here is a read from a crafter, original mpps v5,
vehicle would not write on obd though, was bdm job in end using cmd1255

Harrycz44
28th November, 2011, 05:57 PM
I read it with x-prog.

pulsar2000
2nd November, 2013, 05:00 PM
my bdm 100 (china) using dimsport sw
i get :
MPC500 Family Version: 0x00020020
MPC563/4 Part Number: 0x36200000
EPEE Status: 1
Flash Not Identified
Power error or communication error (E14)


So no read, all connected ok. anyone ever had same with crafter ? i know bdm working perfect all other ecu`s i tried