technomate 5300d usb

[davey ply]

just patched /softcam my tech at moment its only picking a few
channels on 19.2 e wil it pick any more if i change angle to pick up other sats till i get motorised

[.: JaCkPoT :.]

Well yes but you wil have to change the elevation slightly and lnb skew ever so slightly to get the best signal... The satellites are in a arc... Thor being highest here in the uk..
How big is your dish?

[davey ply]

my dish is 90cm do i edge up slighlitly to get more channels

[.: JaCkPoT :.]

Well if you want a sat between 19e and one west then up but more higher the closer to one west you go...then once you go past one west the higher the number goes west the lower it should then go...if you go past 19east the dish will go lower...then you will have to do the lnb skew.

[davey ply]

if i get motorised dish. will sats be picked up automatic or wil they have to be pre set
thanks for answering my qustions

[benny/9]

if i get motorised dish. will sats be picked up automatic or wil they have to be pre set
thanks for answering my qustions
***************************************
hi m8,
when you have a motorised dish fitted and set up
the sat fitter will scan and set the channels and satellites in for you then the dish will move to them, when you change satellites

[davey ply]

THANKS FOR INFO DO YOU KNOW A GOOD MAKE AND MODEL OF MOTOISED DISH

[.: JaCkPoT :.]

Triax 88cm dish{measures at 91cm}, a technomate 2200motor, darkgold 0.1db lnb, and 2 good set of t&k brackets...check out tringsat.com[the new starsat]

[davey ply]

thanks m8 cheers

[Manic01]

Whats that all about mate?

[Nutsandbolts]

Hi. Even a TM2600 motor is very good. Brand new around 50 quids. Easy to set up and operate. Use USALS to make your life easier. Regards.

[Manic01]

Thread is 2 years old.

[Nutsandbolts]

Oh thanks for that. I was only looking at the reply from this morning without realising how old this thread was...Do we know if Davey Ply managed to sort himself out?? Regards.