neverquiet
29th November, 2011, 02:27 AM
Hi M8's
Here I have a mustang 2004 which won't start.
I programmed two keys for the vehicle successfully with the vehicle starts normally. The customer picked up the vehcile and after about 20 minutes later, the car won't start.
The symptoms are
1. When I turned the key on all the lights on the dash stays off for a few minutes then all the lights comes on then off except the theft keep blinking and service engine light on.
2.The section that shows the millage is on
but only shows _ _ _ _ _ _ _ _ _ _ _
3. The engine only cranks but no start.
I use T300 key programmer to check the error code.
It gives me two codes
1. SCP message missing
2. no tx verify
The vehicle was fixed by a mechanic.
He removed a Ford Vehicle System module from the vehicle.
The P/N: 2W7J-19A498-AA CODE Systems H63DB
Please give me some help!
Here I have a mustang 2004 which won't start.
I programmed two keys for the vehicle successfully with the vehicle starts normally. The customer picked up the vehcile and after about 20 minutes later, the car won't start.
The symptoms are
1. When I turned the key on all the lights on the dash stays off for a few minutes then all the lights comes on then off except the theft keep blinking and service engine light on.
2.The section that shows the millage is on
but only shows _ _ _ _ _ _ _ _ _ _ _
3. The engine only cranks but no start.
I use T300 key programmer to check the error code.
It gives me two codes
1. SCP message missing
2. no tx verify
The vehicle was fixed by a mechanic.
He removed a Ford Vehicle System module from the vehicle.
The P/N: 2W7J-19A498-AA CODE Systems H63DB
Please give me some help!