View Full Version : rav4 smart key
automatemad
30th November, 2011, 09:41 AM
hello
RAV4 G JPN 2AZFE ATM CVFC 05S
i reset immo ,with t300, rav4 now i cant even program original key back.
original key was weak ,you needed to bring key very near to start car
now am grounded!!
smart ecu says 0 keys programmed
i have another key that i also need to add to this car
before resetting i tried to add but could not ,hence decided to reset immo
joubliss
30th November, 2011, 11:30 AM
with ur first problem the remote control worked or not ??
automatemad
30th November, 2011, 12:05 PM
with ur first problem the remote control worked or not ??
original remote was not working before only starting from very near
joubliss
30th November, 2011, 12:17 PM
had same problem before, problem was a wire in the right (down of passanger in right). found wire cuted.
look for that and look for how to adapt ur smartkey. there is a chinese cable can do it http://www.digital-kaos.co.uk/forums/f178/avdi-commander-toyota-frustration-237115/
automatemad
30th November, 2011, 02:03 PM
had same problem before, problem was a wire in the right (down of passanger in right). found wire cuted.
look for that and look for how to adapt ur smartkey. there is a chinese cable can do it http://www.digital-kaos.co.uk/forums/f178/avdi-commander-toyota-frustration-237115/
hi guy
here is the file from smart key ecu
regards
automatemad
30th November, 2011, 02:14 PM
hi guy
here is the file from smart key ecu
regards
is it possible to reprogram chip to bring car on
dilick
30th November, 2011, 02:35 PM
is it possible to reprogram chip to bring car on
can you switch on the igntion after reset?
automatemad
30th November, 2011, 03:51 PM
can you switch on the igntion after reset?
first it was then when the t300 was remove it didnt come on again
keygargoil
30th November, 2011, 05:27 PM
can you read both keys and post the data
automatemad
30th November, 2011, 05:58 PM
can you read both keys and post the data
i only have tmpro
i not able read with it tmpro
keygargoil
30th November, 2011, 06:50 PM
tm pro should be able to read your keys mine recognises the dump
automatemad
30th November, 2011, 07:15 PM
key that was there before
Recognizing transponder...
||||
Transponder recognized as Texas Crypto
|||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||
ID4D - 67 - JMA TP xx
Password: 94 - Locked
Identifier: 03 - Locked
Serial number: 19A8D81A - Locked
Secret key: Locked
Toyota/Lexus smart key
donor key
ID4D - 67 - JMA TP xx
Password: 94 - Locked
Identifier: 47 - Locked
Serial number: DB21911A - Locked
Secret key: Locked
Toyota/Lexus smart key
automatemad
1st December, 2011, 04:12 AM
hi
does anybody have dump that can bring ignition on
regards
vanos batam
1st December, 2011, 06:51 AM
hi
does anybody have dump that can bring ignition on
regards
PLS READ ECU ID CODE OR IMMO BOX 93C46 ALSO ECU DUMP
felix17popa
1st December, 2011, 07:13 AM
if you get smart ecu virgin dump, you will get ignition on and after proceed to register key. unfortunately I do not have this virgin file
itrade
1st December, 2011, 09:18 AM
I had the same problem and I managed to program the key with T300
Follow this procedure carefully!
Advanced Diagnostics (http://www.advanced-diagnostics.co.uk/htm/Training-Video-Watch.php?Video=LEXUS+2010+SNEAK+PREVIEW#551407)
automatemad
2nd December, 2011, 07:38 AM
I had the same problem and I managed to program the key with T300
Follow this procedure carefully!
Advanced Diagnostics (http://www.advanced-diagnostics.co.uk/htm/Training-Video-Watch.php?Video=LEXUS+2010+SNEAK+PREVIEW#551407)
is it possible to write a normal transponder 67 to put ignition on on this car
regards
itrade
2nd December, 2011, 08:46 AM
I do not know when I learned the key early work only remote.
Then put the key in the ignition button and learned transponder. My key was brand new!
ninja123
2nd December, 2011, 09:09 AM
I had the same problem and I managed to program the key with T300
Follow this procedure carefully!
Advanced Diagnostics (http://www.advanced-diagnostics.co.uk/htm/Training-Video-Watch.php?Video=LEXUS+2010+SNEAK+PREVIEW#551407)
You say a T300 can do this???
In your video is latest T-Code or MVP pro......
ninja
itrade
2nd December, 2011, 09:33 AM
You say a T300 can do this???
In your video is latest T-Code or MVP pro......
ninja
Exactly...
automatemad
2nd December, 2011, 10:18 AM
hi
if i were to buy new items what should i buy to start this car
felix17popa
2nd December, 2011, 10:28 AM
smart ecu, id code ecu, steering lock ecu and after you need to synch with engine ecu. I would try to get first smart ecu, copy virgin data. once you have smart ecu with virgin file, ignition should come on...
felix17popa
2nd December, 2011, 10:38 AM
both smart keys you have can be cloned in to tpx2 as well. if you take out dump from id code ecu, someone can add key data in, then you should be able to get ignition on when keep the key with toyota logo against start button
automatemad
2nd December, 2011, 10:52 AM
both smart keys you have can be cloned in to tpx2 as well. if you take out dump from id code ecu, someone can add key data in, then you should be able to get ignition on when keep the key with toyota logo against start button
which best way to remove id box?without bring dash down
felix17popa
2nd December, 2011, 11:00 AM
there is no other way, id code ecu is behind evaporator box, place is very tight, cannot access otherwise.
felix17popa
2nd December, 2011, 11:02 AM
i suggest you add the original key car came with in id code ecu and make sure key battery is good (better just put a new one to be on safe side)
felix17popa
2nd December, 2011, 11:20 AM
this is a dump (not virgin) from a rav4 id code, maybe you will need to compare...
automatemad
2nd December, 2011, 05:38 PM
finally got to the id box
vanos batam
3rd December, 2011, 06:35 AM
MAY BE CAN HELP
ninja123
3rd December, 2011, 09:36 AM
MAY BE CAN HELP
Hi vanos, is this instructions for the orange obd key programmer or is it something new??
ninja
vanos batam
3rd December, 2011, 11:21 AM
this is a dump (not virgin) from a rav4 id code, maybe you will need to compare...
here also stering lock module..for compare
automatemad
3rd December, 2011, 11:44 AM
here also stering lock module..for compare
hi
you have data from another smart box rav4 with keys
i put then reset and see what happens
i only have from vx
immo_key
3rd December, 2011, 12:26 PM
here also stering lock module..for compare
Halo my friend
What is compare ?
Regard
bram380
3rd December, 2011, 02:35 PM
Smart system RAV4 2007-2011
Engine does not start:
-----------------------
1. ID code box power source circuit
2. Certification ECU power source circuit
3. Steering lock ECU power source circuit
4. Entry and start system (for door lock)
5. Entry and start system (for starting: 1AZ-FE)
6. Entry and start system (for starting: 2AZ-FE)
7. Entry and start system (for starting: 2AD-FHV)
8. Entry and start system (for starting: 2AD-FTV)
9. SFI system (1AZ-FE)
10. SFI system (2AZ-FE)
11. ECD system (2AD-FHV)
12. ECD system (2AD-FTV for CCo)
13. ECD system (2AD-FTV for DPF)
bram380
3rd December, 2011, 02:42 PM
RAV4 System diagram 2007-2011:
automatemad
3rd December, 2011, 05:45 PM
hi guys
i cloned data now i how have ignition on but how to move key to my own dump
D4D - 67 - JMA TP xx
Password: 94 - Locked
Identifier: 35 - Locked
Serial number: CF2AFD1A - Locked
Secret key: Locked
JMA TPX2
Toyota/Lexus smart key
cardoctor
4th December, 2011, 03:44 AM
I can help you...
Just pm me Now!!
automatemad
4th December, 2011, 10:33 AM
hi
how can i marry id code and smart ecu
sogaro
4th December, 2011, 02:02 PM
Hello Automatemad, for your car this is the understanding. There are basically four components necessary namely the id code box, Cert. ECU, the Steering lock ECU and the Smart key. To fix your car, all you need is a virgin file for the Cert Ecu and Id code box, you do not need the Steering lock ecu dump at all. If you have those two you will be able to program any key to your car. In the absence of the 2 aforementioned, you will need to clone the 3 units above. But before cloning, you must first add your own key to the donor car, having the ignition on as you have now without using virgin files for the Cert ecu and Id box or the donor Steering lock ecu with the other 2units dumps is merely a charade....won't work bro.
automatemad
23rd December, 2011, 04:33 AM
Hello Automatemad, for your car this is the understanding. There are basically four components necessary namely the id code box, Cert. ECU, the Steering lock ECU and the Smart key. To fix your car, all you need is a virgin file for the Cert Ecu and Id code box, you do not need the Steering lock ecu dump at all. If you have those two you will be able to program any key to your car. In the absence of the 2 aforementioned, you will need to clone the 3 units above. But before cloning, you must first add your own key to the donor car, having the ignition on as you have now without using virgin files for the Cert ecu and Id box or the donor Steering lock ecu with the other 2units dumps is merely a charade....won't work bro.
car sort by using good dump from another car and tpx2
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.