Reading airbag fault with fiat ecuscanner

[Fec001]

Hi!
I would like to read airbag unit and clear faults in car alfa 147 with ELM 327 and fiat acuscanner program. But it can't connect to the airbag modul, every other thing is working fine (ECU, service interval etc.) except the airbag. It writes VAG-COM or kkl interface needed for reading airbag.....
I tried with Vag k+can comm.... but no connections.......

[lee_hdi]

Do you have the adapter cables like in this picture? - http://www.gendan.co.uk/product_FESHW.html

The yellow, green and red cables

[Fec001]

ofc not :)....

[morfej]

If you would check FiatECUScan - Fiat, Alfa, Lancia ECU Reader / Scanner (http://www.fiatecuscan.net/SupportedVehiclesList.aspx) and you will notice that you need KKL fo connect to alfa 147 SIEMENS MY99 Airbag or Allied MY97 Airbag nad your KKL must be modified to connect K-line to pin 3 at OBD2 connector.

br

[lee_hdi]

ofc not :)....

Buy them. They are only about ?20

[Fec001]

Now I'm trying a Lancia Musa. Modified the k line to OBD PIN3 but no connections.......

[morfej]

U need elm or obdkey as musa have airbags on can, not k-line.

[Fec001]

U need elm or obdkey as musa have airbags on can, not k-line.

Yes I did it with ELM 327 without pin 3 modified and it worked fine......