View Full Version : A4 milage
snecii
2nd December, 2011, 11:01 AM
Hello Please help me with Audi A4 Milage!
It should be about 168000 Km
Really Thanks!
emanuel2010
2nd December, 2011, 11:17 AM
exact date please.car?year?dash?what you read?Your dump is wrong.
snecii
2nd December, 2011, 11:35 AM
exact date please.car?year?dash?what you read?Your dump is wrong.
This is a AUDI 1997 Dashboad with 93C46 eeprom
If it is wrong then wich eeprom is the good one?
emanuel2010
2nd December, 2011, 11:53 AM
File capacity is not good.what programs do you use?of an image that will help you understand.
markony79
2nd December, 2011, 11:59 AM
This is a AUDI 1997 Dashboad with 93C46 eeprom
If it is wrong then wich eeprom is the good one?
Try this, I found something 400000km
snecii
2nd December, 2011, 12:02 PM
File capacity is not good.what programs do you use?of an image that will help you understand.
I use ULTRAPROG.
Original KM is about 248000
I read it in 93C46A 8bit and 16bit
here is 16 bit
emanuel2010
2nd December, 2011, 01:12 PM
sorry.should be read with a programmer and you can save in bin extension.ultraprog not dedicated to this.
richard27
2nd December, 2011, 04:09 PM
Car type: Audi A4 - 93c46 - without MFA
The mileage is stored in the next lines:
0000: FD 8E FD 8E FD 8E FD 8E FD 8E FD 8E FD 8E FD 8E
where the next bytes:
FD 8E - is a mileage
168000km = D6FB try
snecii
5th December, 2011, 10:12 AM
Car type: Audi A4 - 93c46 - without MFA
The mileage is stored in the next lines:
0000: FD 8E FD 8E FD 8E FD 8E FD 8E FD 8E FD 8E FD 8E
where the next bytes:
FD 8E - is a mileage
168000km = D6FB try
My file lokks like this:
What do I have to change?
Thanks
blackpirate
5th December, 2011, 10:21 AM
My file lokks like this:
What do I have to change?
Thanks
bro richard gave u the answer.
in your file on first line replace a1 c5 with D6FB! entire line!
snecii
5th December, 2011, 11:08 AM
bro richard gave u the answer.
in your file on first line replace a1 c5 with D6FB! entire line!
Hello!
I did it! Now it is stand at 17040 Km one zero is missing :)
What now?
snecii
5th December, 2011, 02:26 PM
Hello!
I did it! Now it is stand at 17040 Km one zero is missing :)
What now?
Di I have to write the 2. line too?
snecii
6th December, 2011, 07:57 AM
Please help me to finish this!
Thanks!
snecii
6th December, 2011, 08:04 AM
Car type: Audi A4 - 93c46 - without MFA
The mileage is stored in the next lines:
0000: FD 8E FD 8E FD 8E FD 8E FD 8E FD 8E FD 8E FD 8E
where the next bytes:
FD 8E - is a mileage
168000km = D6FB try
In this way there will be only 17040 Km...
What do I have to do?
dave11674
6th December, 2011, 12:20 PM
try byteswap mate
so instead of writing D6 FB
write in FB D6
give it a shot
cant harm and its a higher value for sure.
give more info on the vehicle too
dave
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.