View Full Version : Volvo HU 1205 dump
mislav88
2nd December, 2011, 03:15 PM
I urgently need 93LC46 rotated dump from Volvo HU 1205.
Is it possible that I erased it by reading it as not rotated?
Thanks
juisro
2nd December, 2011, 03:29 PM
I urgently need 93LC46 rotated dump from Volvo HU 1205.
Is it possible that I erased it by reading it as not rotated?
Thanks
Hi, try dump code 2115
mislav88
2nd December, 2011, 03:54 PM
thanks, but it seems that i have adapter problem, as it wont write either, will check on that
maciupiciu
2nd December, 2011, 04:12 PM
if U put it in normal MW socket, probably U destroy the eeprom, but U can put a normal one with wires.
mislav88
2nd December, 2011, 10:57 PM
i had adapter problem, all works ok now, but radio dont work when i put it back in the car. do i have to wait with ignition on until it asks for code?
zabra
2nd December, 2011, 11:17 PM
post dump for reset counter ,or wait
mislav88
2nd December, 2011, 11:19 PM
Can you tell me from the dump how long do i have to wait? So i dont need to disassemble whole unit again.
zabra
2nd December, 2011, 11:30 PM
wait 1h or use this dump
mislav88
2nd December, 2011, 11:38 PM
radio is allready on a bench connected at 12V for a half an hour so i will wait, it would took me longer to reprogram eeprom as it is on the worst possible place to reach
mislav88
3rd December, 2011, 12:25 AM
after 1 hour still nothing on screen. is it becaouse i pushed the buttons? radio takes and ejects cds ok, so it is getting power.
zabra
3rd December, 2011, 12:55 AM
when you receive the radio it was normal and after you read the dump it become without display ? or from the first without display
check the solder of eeprom
mislav88
3rd December, 2011, 12:59 AM
from the first without display
zabra
3rd December, 2011, 01:20 AM
try to change your dump by other one maybe its corrupted
mislav88
3rd December, 2011, 02:29 AM
it was one flat cable that wasnt pushed into the clip inside, hope it will work now. i also read the eeprom again and all is ok, soldering also good. i also noticed that pin 1 of the eeprom is a little bit bent, but hey what a luck that pin is not used on rotated 93c46.
will put it in a car tomorrow and it should work.
mislav88
4th December, 2011, 09:50 PM
looks like everything is ok now, customer didnt called back for almost two days, thanks for help
Edvardas
7th August, 2018, 09:11 AM
hello, anyone can reset volvo radio?
petronijul
7th August, 2018, 09:18 AM
hello, anyone can reset volvo radio?
try this file code 3211
masterskay62
7th August, 2018, 09:20 AM
hello, anyone can reset volvo radio?
Hi.
Try.......3203
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.