mtu diasys 2.55 [Sitemap]

givenhell

2nd December, 2011, 04:56 PM

is that for connect to mtu engine and to know what the problem happen on that engine...or what...

khadang

2nd December, 2011, 05:03 PM

is that for connect to mtu engine and to know what the problem happen on that engine...or what...

can export,diagnostic, edit parameter and reprograming.
but you need tool (interface & cable) ,dongle...

ottomotto

2nd December, 2011, 07:53 PM

hi.
i shared mtu diasys 2.55.
https://rapidshare.com/files/565063568/mtu_diasys_2.55.rar

Do you have cable pinouts Sub-D to ... ?

khadang

2nd December, 2011, 08:15 PM

Do you have cable pinouts Sub-D to ... ?

I do not understand your mean, i have pinouts of ECU MDEC and ADEC.
Sub-D to ... mean?

ottomotto

2nd December, 2011, 08:40 PM

I do not understand your mean, i have pinouts of ECU MDEC and ADEC.
Sub-D to ... mean?

from Sub D9 in USB-to-CAN to controller.

mathura

3rd December, 2011, 12:14 PM

can export,diagnostic, edit parameter and reprograming.
but you need tool (interface & cable) ,dongle...

Where do I get the dongle. Do I have to source this from MTU or elsewhere.

khadang

3rd December, 2011, 01:20 PM

Where do I get the dongle. Do I have to source this from MTU or elsewhere.

hi friend.
MTU get Dongle with different level for they's service.
dealer or distributor.
dongle have level , name of service and exp time.
when connected to the ECU, ECU will save all information of you.

i don't think can buy dongle and file from mtu or elsewhere.
dongle is hardlock MTU other from aladdin ( HASP HL ) with good security system. can emulator it but can't crack it.
My dongle also can not upload files from the ecu.
I have to order file from MTU.

I'm trying to change the 50 <-> 60 Hz without file calibration from MTU.

mathura

3rd December, 2011, 02:34 PM

Hi friend,
Good advice about the dongle.
Can you give me the pass for the software 2.55 please.

Thanks

khadang

4th December, 2011, 08:09 AM

Hi friend,
Good advice about the dongle.
Can you give me the pass for the software 2.55 please.

Thanks

check pm please!

khadang

4th December, 2011, 05:20 PM

Do you have cable pinouts Sub-D to ... ?

hope help you. if want i can wiring su d9 to jack ADEC/MDEC/SAM for you.
here :

ottomotto

4th December, 2011, 09:55 PM

hope help you. if want i can wiring su d9 to jack ADEC/MDEC/SAM for you.
here :

Yes if possible, and thnx.

toolking

5th December, 2011, 01:41 AM

khadang
I just sent you a pm .Please let me know .

mathura

5th December, 2011, 08:14 AM

khadang

5th December, 2011, 08:36 AM

Does anyone have this probelm.
When I unrar the file it creates a folder called DaiSys_2.55(E) but I am having 380 files with break in operation.
When I opened the folder there are some folders that are empty (example of empty folders-OBDC, Mdac_V2_5 and WINRAR)

Thanks

i don't know what problem on my upload file,rapidshared or your computer.
it working normal. you can creat skype acc and i will sent direct for you.
thank.

mathura

6th December, 2011, 04:10 AM

i don't know what problem on my upload file,rapidshared or your computer.
it working normal. you can creat skype acc and i will sent direct for you.
thank.

Please resend password, I have emptied my inbox and I think that I have used the wrong pass my friend

Thanks

mentos

6th December, 2011, 11:50 AM

Password pls, thanks !!!

khadang

12th December, 2011, 06:26 PM

here mtu diasys 2.55 no pass.
https://rapidshare.com/files/3409582923/DaiSys_2.55__E_.rar

ottomotto

12th December, 2011, 07:09 PM

here mtu diasys 2.55 no pass.
https://rapidshare.com/files/3409582923/DaiSys_2.55__E_.rar

Did you made wiring from D9 to ADEC/MDEC/SAM ?

mathura

13th December, 2011, 12:46 AM

here mtu diasys 2.55 no pass.
https://rapidshare.com/files/3409582923/DaiSys_2.55__E_.rar

My Friend,
I can now unrar files without probelms. I had probelms with the earlier post.

I will run setup and let you know.

Thanks

jokey

29th December, 2011, 12:32 PM

I have its install and run dongle for a crack file. if you interesting in it please contact me

khadang

17th January, 2012, 07:16 PM

I have its install and run dongle for a crack file. if you interesting in it please contact me

hi friend. can tell me level of your dongle emulator.
thank

spannermonkey

18th January, 2012, 10:15 AM

I have its install and run dongle for a crack file. if you interesting in it please contact me

What level can you get with your crack file? level 2a/b?

mathura

18th January, 2012, 11:06 AM

I have its install and run dongle for a crack file. if you interesting in it please contact me

I am interested jokey

dionysiosg

7th February, 2012, 01:03 AM

also interested jokey.thanx in advance

mathura

7th February, 2012, 02:49 AM

also interested jokey.thanx in advance

Hey jokey is bluffing, name speaks for itself

jkostic

21st February, 2012, 05:29 PM

Great stuff!Thank you!

trujillohot

25th February, 2012, 02:16 AM

I have its install and run dongle for a crack file. if you interesting in it please contact me

Hi friend if you want please I interesting in it.
Thank.

uchak

4th June, 2012, 12:07 PM

hi;

this link dead pls again upload.

thnx

Jear

26th June, 2012, 05:30 PM

Hi Jockey

I am interested in the crack.

ruymisael

8th July, 2012, 12:52 AM

hi anyone has hard key emulator for mtu DiaSys or where I can get
thanks for the help

SteveOFF

8th July, 2012, 01:22 AM

hi.
i shared mtu diasys 2.55.
https://rapidshare.com/files/565063568/mtu_diasys_2.55.rar

Any chance to reupload m8?
Please?

nanocycle

23rd August, 2012, 06:43 AM

Hello Guys

Also i need this software with circuit of cable.
Please re-Upload it.

Thanks

khadang

17th December, 2012, 05:53 PM

new link dk friend.
DaiSys_2.55 (E).rar (http://www.mediafire.com/?eeo4cdcg8b6xccl)
pass:digital-kaos.co.uk

anoriega

17th December, 2012, 07:25 PM

I have its install and run dongle for a crack file. if you interesting in it please contact me

I am interested jokey

anoriega

17th December, 2012, 09:01 PM

What its the correct part number for USB-to-CAN by IXXAT, i want buy one, but IXXAT have four part number

1.01.0062.11220
1.01.0087.10100
1.01.0087.10200
1.01.0088.10200

khadang

18th December, 2012, 03:56 AM

What its the correct part number for USB-to-CAN by IXXAT, i want buy one, but IXXAT have four part number

1.01.0062.11220
1.01.0087.10100
1.01.0087.10200
1.01.0088.10200
here friend : IXXAT [USB-to-CAN II] (http://www.ixxat.com/usb-to-can-ii-interface_en.html)

anoriega

11th October, 2013, 04:10 PM

Mtu Diasys 2.60??

bardia200

17th May, 2015, 05:14 PM

Hi dear friends!
Is there anyone has engine software database for~mtu~engines???
(Flash files)
Thanks alot!!

trujillohot

29th May, 2015, 02:40 AM

Hello friend, in the MTU engines are not required to perform flash like the caterpillar engine

hasanaby

19th November, 2015, 12:13 AM

hasan.aby Skype name xxxxxxxxxx

glongo

23rd November, 2015, 07:02 AM

Hi dear friends!
Is there anyone has engine software database for~mtu~engines???
(Flash files)
Thanks alot!!

hi Dear bardia200,
I am working on MTU Automation .
Just describe your problem thoroughly,
The steps to do so and to explain the problem in detail .

Febri999

18th April, 2017, 09:13 AM

Hy i interested with software mtu diasys 2.7 how i can get?

Sent from my Redmi Note 4 using Tapatalk

jetdede

22nd April, 2017, 11:27 AM

even you get the software.it still need dongle to operate it

thuongviteq

11th January, 2019, 07:57 AM

hi.
i shared mtu diasys 2.55.
https://rapidshare.com/files/565063568/mtu_diasys_2.55.rar

Dear Sir
Could you pls check and consult me that I can not dowload as link : https://rapidshare.com/files/5650635...iasys_2.55.rar (https://rapidshare.com/files/565063568/mtu_diasys_2.55.rar)
Could you pls send to my email xxxxxxxxxxxxxxxx
Thanks & best regards
NQ Thuong