View Full Version : Lancer 2008 remote program
THeFOg
5th December, 2011, 09:36 PM
Hi m8's did anyone program the remote section of the lancer 2009 ? By the way the sbb 33.02 don't connect in the USA market! And I tried bridge pin 1-4 or MVP pro no go!!!
Thank You in advance m8's.
huangyc110
18th December, 2011, 05:19 AM
turn ign on, bridge pin 1 to the ground***65292;press the Emergency lamp button 3 or 6 times,if the car has Reaction,press remote. good luck
large12390
6th March, 2012, 07:39 PM
turn ign on, bridge pin 1 to the ground***65292;press the Emergency lamp button 3 or 6 times,if the car has Reaction,press remote. good luck
thanks dear
is this for old or new model? becuse i have 2010 lancer smart key need to program remote
regardes
ivanrpm
8th March, 2012, 04:31 AM
thanks dear
is this for old or new model? becuse i have 2010 lancer smart key need to program remote
regardes
Hi mate I think that new model is just with original scantool or t-code pro, there is not onboard procedure!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.