Nissan Xtrail 2002 incorrect code 5523

[elecautocr]

Hello members:

I am trying to program Nissan Xtrail 2002 engine QR25 gasoline. I am using code 5523, but Tcode says the codes is incorrect. The immobilizer part number is Siemens A 5WK4 8041A_G. Do any of you have pin code for this car ??

Thank you

[Dylan Chin]

Hi mate,
maybe you use a wrong transponder.
Before that,i use my mvp and sbb program the nissan also say the code is incorrect but the pin really true.
The problem is unsuitable transponder

[sogaro]

take a pix of the label on the immo coil and post it

[elecautocr]

Hello:

I am attaching picture of immo coil. I am using the original key, I also tried with new transponder and the same problem. I also bought brand new immo coil and the problem is the same.

[immo_key]

Hi

If fuse and all kable are oke
mybe you need change ecu
have experienced some thing before

Regard

[nazz2]

Maybe your immo is blocked, leave ignition on for 30min or do batt reset,they are variation with lable A, if these methodes dont work,obtain the pin from your local dealer.

[elecautocr]

Hi all and thanks for help:

I did battery reset and put ignition for 1 hour, and I could program the car... thanks very much !!!!

[RonMcleod]

Hi
Im trying to fit a second hand engine ECU to a Nissan X-Trail 2004, the problem is that I am using the 5523 code and it fails the initialisation every time, can someone tell me if there is a way to get the correct code?????

Sorry if this is not posted in the correct area, I'm new :)

Thanks in advance
Ron

[elecautocr]

If inmobilizer is letter "A", yes code is 5523, if it is letter "B" is randon code.

[lashkar97]

please post ur vin here
and i think u used newly model of ecu with old immo
and also check ur key transponder is id60 or id46

[waliddahan]

Hello members:

I am trying to program Nissan Xtrail 2002 engine QR25 gasoline. I am using code 5523, but Tcode says the codes is incorrect. The immobilizer part number is Siemens A 5WK4 8041A_G. Do any of you have pin code for this car ??

Thank you
try 9901 and report
regards

[DIGITAL_KAOS]

pincode is ok thats sure

Let Me know How You Programming

[key-maker]

Post the picture of the coil ring

[lashkar97]

programing is same as u tri in type 4 by T300
but before program must read fault code so u know why its
give error . if its give immo lock fault code than u have to remove batt and than put again and leave ign on for 1 hour and tri program key