PDA

View Full Version : please help repair vcd 11.X beta or downgrade to 10.6.0


gzk
8th December, 2011, 08:29 PM
hi
i have a little problem with a brand new chinese vag com hex can 11.3 or 11.8 beta .

the cable arrived faulty . the 7805 regulator was dead .
i change it .
it as not been damaged by a internet upgrade .

now when i plug the cable the computer recognise it as ross tech cable and instal drivers , no problem .

after i launch the soft with the cable not plugged on the car and go to test , the soft detect ross tech cable .

after i plug it on the car and the led come green and if i click on test the soft don't find any cable .

the car has no problem , my other 10.6 cable work great on it .
the laptop as no problem .
sure it from the cable .

i want to try to repair it or just downgrade it on the 10.6.0 as my other cable .

if someone can help me
thanks
elephantul
9th December, 2011, 07:59 AM
you have programer to write atmega?
nicole99wu
9th December, 2011, 10:10 AM
don't know how to repair it , beta version is not stable sometimes.
i only have a 10.6, download from h

greetings
gzk
9th December, 2011, 06:19 PM
you have programer to write atmega?hi only have a gq4X usb i don't know if it can do atmega
gzk
9th December, 2011, 06:20 PM
don't know how to repair it , beta version is not stable sometimes.
i only have a 10.6, download from here
VCDS 10.6 software download (http://chinaautodiag.com/download/vcds-10.6xi.zip)

greetings

hi
i already have the version as i sayd in my post .
i have to another 10.6.0 cable who are working fine .
thanks
elephantul
10th December, 2011, 02:58 PM
this is full eprom + flash from atmega 162 vers 11.2, you must program interface with this
sergo
11th December, 2011, 08:51 PM
this is full eprom + flash from atmega 162 vers 11.2, you must program interface with this
you have 93c46 eprom too ?


thx
Code Breaker
12th December, 2011, 04:13 PM
Is it possible to upgrade the 704.1 cable to higher version? (version 11)?


Cheers
KenshinPT
13th December, 2011, 10:27 AM
Is it possible to upgrade the 704.1 cable to higher version? (version 11)?


Cheers

Yes it is.

All the help you need, and even more, is here: http://www.digital-kaos.co.uk/forums/f152/vag-com-vcds-everything-99750/
olmar
24th May, 2012, 07:18 AM
Please help me broken interface using windows 7 and 10.6 breaks 3 times a week please flash eprom software 10.6 best thank you