nissan navara 2009 9s12 points

[dave11674]

hi

looked on here and couldnt find any info on this set of clocks.


here is a clear hi res pic showing the main points and points for UPA USB

hope it help soms on you guys out.

the RESET point is not on the usual BDM points so its traced up from the controller pins.

good luck

dave

ps if the info is here im sorry.

[dashradio]

Also here http://www.digital-kaos.co.uk/forums/f174/nissan-navara-2005-a-170498/

[eurodash]

has anyone got pdf for new navara 2011 thanks:celticscarf:

[marcio1758]

This board is different from the other panel, I found an a nissan frontier 2008/09, equal to navara.

[tachonow]

This board is different from the other panel, I found an a nissan frontier 2008/09, equal to navara.
This is also the pic from Enigma.

[smartymarti]

has anyone got pdf for new navara 2011 thanks:celticscarf:


new navara enigma version

[tachonow]

Classic BDM connection.

[marcio1758]

in my puzzle is different, teaches all to connect the panel 12volts

[rastus86]

so has anyone used tacho universal to do this ?

[smartymarti]

in my puzzle is different, teaches all to connect the panel 12volts


same board just that you can connect re dand black in different places

[dave11674]

Tacho universal should do it yeah. try it in nissan menu.

If not use 9s12 tool and read it in and alter manually using tacho soft.

Dave

[rastus86]

ok thanks i will let you know

[diagtech]

Tu will not do 2011 navara when you read with 9s12 tools it reads but isnt the right read dont think tu will support 9s12 512.

[rastus86]

ok thanks for that info so it will NOT do the 9s12 512 but will do the lower number ones ?

[diagtech]

Hi yes think tu will only do up to 256 dont forget last update on that machine was 3 years ago tried it myself mate definitely does not work.

[rastus86]

i have one cluster with 128 and the other with 256 so i can or can not do the 256 ???

so going on what i have read from here i should be able to program a 256 chip with my tacho universal
i have tried but comes up error i think i have pined it out correctly i have posted a picture of it and put the pin number beside it can anyone help me with one

i know the unit is OK i programed one with 128 (chip)
i think i am doing it right ????


many thanks

[rastus86]

anyone help ???