PDA

View Full Version : Ford Focus EEC-V LP4-335



jovime
9th December, 2011, 05:31 PM
Hi guys!

Just arrived a new ECU at my place, with strange problems.

FULL ECU DATA:

VISTEON EEC-V LP4-335 / 1M5F-12A650-BE

The engine does not turn at all, I mean, it does not show the typical problem with this ECUs (no ignition or no injectors opening, anyways the ignition buffer seems that needs to be replaced).

The engine does not turn, that's all. No DTC's, I have communication with the ECU, all wiring checked.

My intention was to clone the ECU, but I can't find any EEPROM, only the intel hybrid flash on the bottom of the PCB (check pictures).

Changing the PLCC32 to another ECU will do the job?

Kind regards!

Mac Gyver
9th December, 2011, 08:35 PM
jovime,

ST70014 is probably a serial memory read it as 95040 and write it on the other ECU.

sogaro
9th December, 2011, 09:31 PM
@Mac Gyver, you are right, its same eeprom and should be read as 95040

smdoto
11th July, 2012, 12:02 PM
i am read 95040 focus ecu immo off adresss help

ciprishor
28th January, 2018, 10:37 AM
I have a 2003 Focus with key lost. I read the dump 95040, can someone add a 4d60 key to dump?

Attached the read from 2 4d60 transponders.

morgano
28th January, 2018, 10:45 AM
Use vcm to learn new key.