View Full Version : 2006 RANGE ROVER HSE EWS4
shitad
11th December, 2011, 04:46 AM
Hello I need help on a 2006 RANGE ROVER HSE with all Keys Lost. EWS 4 system with a MC9S12DG128 chip Mask 3L40K.
I was able to read 9S12 with Xprog and can now see the correct VIN from the file I have read.
Now I need to make transponder BUT all I have is
Chinese Hitag 3.0
BWM EWS 3 and 3+ transponder Programer
and Clone Zedbull
Is there anyway I can do this with the pieces I have ?
Help!!!!
Rito
11th December, 2011, 03:39 PM
Zed bul can make this...
Use your dump in zed-bull for producer transponder....
shitad
11th December, 2011, 03:43 PM
Zed bul can make this...
Use your dump in zed-bull for producer transponder....
The Zedbul I have is a clone with Version 508 is does not support ews4.
Also my bin file is 2 KB so most software says file size incorrect.
shitad
11th December, 2011, 06:16 PM
I also think this is a ID 46 transponder.
smokey08
11th December, 2011, 06:36 PM
Post dump and I will reset and give you key password/logic
shitad
11th December, 2011, 08:11 PM
ok and will I be able to use Zedbull clone to write logic ?
cjawahir
11th December, 2011, 08:31 PM
ok and will I be able to use Zedbull clone to write logic ?
hello i you sure this is ews or is this ford system with JMA 12 chip ?
cj
shitad
11th December, 2011, 08:43 PM
hello i you sure this is ews or is this ford system with JMA 12 chip ?
cj
This is my box .
cjawahir
11th December, 2011, 08:46 PM
hello can you tell me , where is the ignition key goes on the steering or in the center next to gear shifter ?
if it on the steering then its ford system
cj
shitad
11th December, 2011, 09:02 PM
hello can you tell me , where is the ignition key goes on the steering or in the center next to gear shifter ?
if it on the steering then its ford system
cj
On gear shifter
cjawahir
11th December, 2011, 09:18 PM
never seen this ews module before .
can you look for a CAS module or scan this vehicle with bmw x5 software , if it works with that then its bmw built .
cj
smokey08
11th December, 2011, 09:53 PM
None of my software will work with this dump, I have never seen a mc9s12dg128 in EWS4 before. Normally they have mc9s12dg64.
Fallen
11th December, 2011, 10:00 PM
Never seen one like this.
LR of this era used a system called SAWDOC which can be done via the OBD port, perhaps this is it?
shitad
11th December, 2011, 10:18 PM
Never seen one like this.
LR of this era used a system called SAWDOC which can be done via the OBD port, perhaps this is it?
Will look into it.
cjawahir
12th December, 2011, 12:06 AM
this cant be bmw ews , because you cannot see vin number like that .
ad 100 pro can do the range rover but need dealer key .
cj
cjawahir
12th December, 2011, 12:19 PM
hi , 2 picture , one is ford and one is bmw system .
if its bmw look for CAS .
cj
Crash-100
12th December, 2011, 03:57 PM
where is BMW ?
I have car in right foto, where immo ?
shitad
12th December, 2011, 06:10 PM
where is BMW ?
I have car in right foto, where immo ?
Next to gear lever for photo on the LEFT
Fallen
17th December, 2011, 02:06 PM
What was the end result with this car?
Sawdoc, CAS or EWS?
shitad
17th December, 2011, 06:02 PM
What was the end result with this car?
Sawdoc, CAS or EWS?
Have not gone back to the Car yet but I think it is Sawdoc, I need to order the key from dealer. A friend tried the DUMP with TANGO but it can not do it.
BigOldRover
22nd February, 2024, 09:02 AM
I have all keys lost ews4 2006 Range Rover HSE
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.