Ford Expedition 93C86

[hcip]

Anybody has a dash dump for Ford Expedition or Ford Explorer with 93C86 eeprom

Thanks

[afitijuana]

Once you get it would you share calculation for it, rigth now I finaly did it by obd.


Enjoy

[makz]

2006 ford explorer

[hcip]

Thanks, Hope that will code it to a car (Expedition 2011)

[hcip]

Once you get it would you share calculation for it, rigth now I finaly did it by obd.


Enjoy

What is your problem with a calculation of this?
it is a regular VDO Semiens algo like Porsche or benz, just divide the Value into two

[hcip]

Sorry for disturbing mate, although Explorer Dash and expedition has the same dash, but I think the dump is different
Car is working good but the Fuel and Temp gauge reading is very High, "Data Error" also displayed in dash

Any body who has a dump file for Expedition (93C86)?

[blackpirate]

test
Download 2007expedition93C86.bin from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/rbpnlk)

[hcip]

Thanks
will try it tommorrow

[hcip]

test
Download 2007expedition93C86.bin from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/rbpnlk)

Same Trouble as before, I think dump still does'nt match

one Expedition 2011 will coming for odo correction, exactly the same model, I will copy the file and load and see the result, will keep you posted for update

[roth18]

try 123456789010

[hcip]

Thanks everyone, problem solved with files copy from other car

I also notice that the power windows of this car doesn't work with a wrong dump and some lights illuminates

Thanks to all of you who try to help

attached the dump from 2011 expedition US model in miles

[miketesla]

can you please send me more information about the dump 110,000 to 170000 in a 2006 ford explorer with the chip eeprom 93c86 with the tacho pro 2008 , thanks hcip

[miketesla]

i try the 2006 ford explorer cluster with the chip 93c86 with my tacho pro 2008, i cant find this model on the programmer but i try the vw skodia felicia with the same chip 93c86 and reads and reset succesufull correctly shows the new miles on the tool screen , but i put the tachometer back in the vehicle dash and still shows the old miles on cluster, can you help me on this afitijuana, this is my email address ******* thanks a lot afi

[Johnner]

Mike,I would advise you have a read of the rules here please : Forum Rules (http://www.digital-kaos.co.uk/forums/showthread.php/2-Forum-Rules)

Pay attention to #24


Thank you...

[miketesla]

i saw the rule 24 a redy, can you send me how can a dump on the ford explorer 2006 with the 93c86, with the tacho pro 2008 or you dont know ether,

[miketesla]

i use the tacho pro with the dongle 93cxx use the port 0 reads correctly , dump 117,000 to 180000, work sucesufull, read the eeprom show s the new miles correct, but after plug in back the cluster in the ford explorer continue show it the old miles, i need to remove the eeprom from the cluster and reprogramm outside, or i need to do via obd, please let me know

[XmoDDeR]

maybe port 0 on tacho pro doesnt configure right to the PE pin. THE 93C86 has a DI serial data input pin3 DO serial data output pin4 PE program enable pin7

but most times u need only 6 wires to program u know ur vss and vcc are good , so issue is with pins 1-4 , check port config as tacho is funny with port use the wrong one and its history. i would believe its port 1.
good luck

[XmoDDeR]

dug in my drives and as i thought 338205
according to schematic 2nd port which would be port 1

again good luck ....................and get an UPA S LOL

[miketesla]

thanks a lot xmodder

[rtbdiagnostic]

dug in my drives and as i thought 338205
according to schematic 2nd port which would be port 1

again good luck ....................and get an UPA S LOL
would upa usb 1.3 clone read and write this s93c86 eeprom - previously i tried on ford ranger 2017 it only shows chip error no change or damage was done though...