29F400BB BDM100?

[JaboJG]

Can BDM100 clone read the 29F400BB which is in the Marelli IAW48P2.31?
Car is a Citroen C5.

[avtonega]

NO
...............................

[JaboJG]

Very difficult getting a tool to read this ECU.
Bought european MPPS v12, Galletto and BDM100.
Do I need to buy a Lexia v3?

[kazikk]

Desolder flash and read with programmer.

[JaboJG]

I could do that. Which programmer would you recommend?

[gzk]

gq4X willem etc...

[alfy]

Have you tryed with Galletto 1260 or magpro2 on bench or OBD?
Citroen IAW48P 2 29F400BB...

[JaboJG]

Have you tryed with Galletto 1260 or magpro2 on bench or OBD?
Citroen IAW48P 2 29F400BB...

Tried Galletto 1260 and MPPS v12 via OBD.
MPPS has no connection and IAW48P2 is not listed as compatible with it but Galletto displays ECU info as 2 lines of hex data then fails on read with SK2 error, even though it should be compatible.

Next step I suppose should be trying on bench.

[agabna]

Tried Galletto 1260 and MPPS v12 via OBD.
MPPS has no connection and IAW48P2 is not listed as compatible with it but Galletto displays ECU info as 2 lines of hex data then fails on read with SK2 error, even though it should be compatible.

Next step I suppose should be trying on bench.

hello
rading in bench is better
you can use beeprog from elnec

[pablo1971]

isnt the 29f readable by getting the chip in boot mode.like the vag...

[JaboJG]

Can't find any info about a 48P2 boot mode. Spoken to other tuners and searched the forums.