Technomate Newbie

[ThatMan]

Hi all.

I acquired a Technomate TM-1000 CI a little while ago. I connected it to my $ky dish and was amazed at the amount of "extra" stuff that's on there, so began reading about what was available up there in the skies above. I have since decided to have a better look for myself and installed a 1.0m motorised dish.

The installer told me the unit had been patched (it also has a Dragon CAM in it), so here I am looking for help and what I can and can't do. Whether my box is good enough (up to date). Etc, etc.

It looks like I have a lot of reading and researching to do, so any pointers to what should be read first would be great.

I suppose my first questions would be:
1) If/when I get a null modem cable and update my box, would I need to repatch it?
2) Should I put the TM aside and get a better box or, because it was free, learn on it, before "upgrading"?
3)What satellites can I pick up from the East of England (Suffolk)?
4)Any other websites worth considering and/or browsing to learn more?

Many thanks

[dick b]

(1) depends but as a rule put the latest patch in with latest softcam dont think the dragon cam will give any more channels.
(2) its an old box but useful for learning
(3) at least all the main sats between 45East and 30West.(over 20)
(4) lots but this is the best for quick and accurate answers

[ThatMan]

Thanks for the quick and concise reply, dick.

I've ordered a null modem lead, so I'll keep reading and learning over the next few days before it arrives, then get to updating.

The patch that you attached to your list.... will that update the satellite database that is built in? The reason I ask, is that it appears there has been some changes in the last few years and some of the ones that are in the receiver have the wrong names or the wrong co-ordinates. The first one I noticed was ArabSat 2C at 26.0E.

[dick b]

no the patch wont update the sats or channels you can rename/add sats and add Transponders in the box.if you do a factory reset make sure you save the channel list you have via the loader as this will wipe everthing out. you need a loader for the patch and softcam as well I"m sending one now(Iforgot yesterday)If you read the"noobs guide to patching your technomate" in the sticky section it will tell you how.
I"ll also see if I can sort out a channel list for your box,It goes on a 1000d ok so should suit your box.

try this channel list it should load ok on your 1000ci,I"v removed arabsat from 26E and renamed 16E I havent checked any others.the sat listings were probably correct when the box was made.(arab sat 2C is now at 169East)

[dick b]

if the 316 patch causes the box to crash on "orf" try this older patch.

[samirami]

(1) depends but as a rule put the latest patch in with latest softcam dont think the dragon cam will give any more channels.
(2) its an old box but useful for learning
(3) at least all the main sats between 45East and 30West.(over 20)
(4) lots but this is the best for quick and accurate answers
hi
i have bought a technomate 5400 supper,is it possible to watch kids channels such as disney for free?
thank you

[dick b]

hi
i have bought a technomate 5400 supper,is it possible to watch kids channels such as disney for free?
thank you

use patch 153 and latest softcam and check out c****s*t on 19E.(read the stickies on patching and only put patch in for your exact box) http://download.for-better.biz/bbs/main.php

[lagerland]

Hi all.

I acquired a Technomate TM-1000 CI a little while ago. I connected it to my $ky dish and was amazed at the amount of "extra" stuff that's on there, so began reading about what was available up there in the skies above. I have since decided to have a better look for myself and installed a 1.0m motorised dish.

The installer told me the unit had been patched (it also has a Dragon CAM in it), so here I am looking for help and what I can and can't do. Whether my box is good enough (up to date). Etc, etc.

It looks like I have a lot of reading and researching to do, so any pointers to what should be read first would be great.

I suppose my first questions would be:
1) If/when I get a null modem cable and update my box, would I need to repatch it?
2) Should I put the TM aside and get a better box or, because it was free, learn on it, before "upgrading"?
3)What satellites can I pick up from the East of England (Suffolk)?
4)Any other websites worth considering and/or browsing to learn more?

Many thanks


All other wedsites are inferior you belong to the best forrum in the world................lol

[Nutsandbolts]

Hi Samirami. With a TM5400 SUPER and latest patch plus a motorized dish of at least 90cm you should get tons of channels from across the universe including childrens channels. otherwise point your dish to ASTRA at 19.2 EAST for some childrens channels like CARTOON NETWORK DISNEY XD. Regards.

[ramzy007]

hi to u all and a happy new yr,i've read almost everything but still need a bit of help,i accidentally reset my technomate TM5200D usb super and now i have lost all my channels and even the the fta,i really need help cos not only am i losing out my kids cant also watch their tiny pops,helping me will the best start for the yr ,ty

[Manic01]

Rescan ssatellite.

[dick b]

if you dont know how to rescan as Manic01 has said put this list in it might not have all you want but will get you out of trouble for now.

[t1m130]

Quick question on upgrading my TM1000CI - am i right in assuming the NULL Modem cable should have female one end and male the other? My PC only has a female connection at the rear?

[Manic01]

Female to Female.

http://ecx.images-amazon.com/images/I/41JZ70W1Q3L._SL500_AA300_.jpg

[t1m130]

Thanks - so how do I connect to PC if I dont have a male version on my PC?

[t1m130]

Sorry, forget that. I am officially a retard as have just noticed a male connector on the side. Doh!

[Stoneyams]

I have been given TM1500CI+ and have attached it to a motorized dish. I realise its an old model, but is it worth patching with phantompatch 316p and newest softcam, or am I wasting my time?

[dick b]

I have been given TM1500CI+ and have attached it to a motorized dish. I realise its an old model, but is it worth patching with phantompatch 316p and newest softcam, or am I wasting my time?

Its worth haveing a play with as long as the motor/dish is setup ok.load both 316 and the latest softcam and see what you get on 39E19.2Eand 4.8E this channel list may help but re-check your usals settings if you use it