ECU BMW

[mazen]

HI DEAR FREANDS
I HAVE CAR BMW WITH EWS 2 MY PROPLEM THE ECU SECONDHAND AND NOT HAVE ECU FOR THE CAR
CAN ENY ONE CAN HELP ME FOR FOUNDING THE ISN FOR THE ECU FOR CHENGING
IAM READING 27C512
THANK YOU FOR HELP ME

[mazen]

hello
no bady can help me
thank you

[bram380]

Read ews & upload here.
Some times ews have vin number.

[mazen]

thank you anser me

[adam28]

ViN is WBACE11010EZ35112 for this dump

[mazen]

hi dear sir
i know for the vin for this dump
my proplem in ISN between ews and ecu
can help me for this proplem

[eprommazza]

hi dear sir
i know for the vin for this dump
my proplem in ISN between ews and ecu
can help me for this proplem

need buy emulator ews2

best regards

[mazen]

hi
why need emolliter
the car crank but not start by ews
the ecu not for this car

[eprommazza]

hi
why need emolliter
the car crank but not start by ews
the ecu not for this car

yes you need know isn of old ecu if not know this
maybe need solve with emulator..

[mazen]

hi dears
not any device can doing that
for ISN
THANK YOU FOR HELP ME

[joemajdalani]

Why not just make alignment with scan tool

[sogaro]

Is there no regular flash like 29f200 in the ecu , there is not ISN in the EWS posted though your keys are shown, you may have to virgin the ecu and reset the ews to factory default to sync with your tool.

[mazen]

HI DEAR
HOW CAN DOING THAT
I HAVE GT1- INBA- CARMEN SCAN-BMW 1.2&BMW 1.4

[eprommazza]

HI DEAR
HOW CAN DOING THAT
I HAVE GT1- INBA- CARMEN SCAN-BMW 1.2&BMW 1.4

try do adapting dde ews ...if can t do it why ecu is from other car
need virgin but i think not easy find it
or you can find another 2 file ecu+ews2 and do new key.
or you buy emulator

see also this tread ....
http://www.digital-kaos.co.uk/forums/f178/bmw-e36-1995-1-8l-m43-need-immooff-237384/

[bram380]

try this dump & align with gt1:

[Youneselm]

witch ecu you have, maybe immo off.
post dump off ecu eeprom

[smokey08]

As this car is a 1999 e36 316i (M43) I think you can read ISN from the ECU using INPA and write the ISN to ews (also using inpa)

[bram380]

Any idea read ISN ecu & dme without inpa?
It's meant modify dump by hex software.