PDA

View Full Version : 6Q0909605S without switch for kids



carsolution
20th December, 2011, 08:14 PM
Hi friends.
Can someone correct this file for me.
VW Polo from 2001.
The car doesnt has kid?s protection (switch and lamp).
I already corrected it but pcm internal faults stays active, the correction is not good.
94442
Thanks to all.
Regards,
Nuno

ovi_dk
20th December, 2011, 08:28 PM
Hi,if its trw v5 this file shold be ok:)Try and report please.

carsolution
20th December, 2011, 08:50 PM
Hi friend.
At this moment I am not at the garage, should be there in 45 minutes but the ECU is equal to the one used in Seat Ibiza.
The software doesnt correct it ok, everytime internal error.
I will test it and let you know.
Thanks a lot for your time friend.
Regards,
Nuno

ovi_dk
20th December, 2011, 09:07 PM
Ok Nuno,please giv me the control modul version to see the right solution,or put a picture please with control modul
Thank you
:joyman:

klakier
20th December, 2011, 09:31 PM
Ovi_dk you good cleared the crash, should work!

ovi_dk
20th December, 2011, 09:46 PM
Thx Klakier,i know coz its a good clear but i want to be 100% shure coz its the w5 trw module controller.Wee will se the results!
Best Regards:manuflag:

carsolution
20th December, 2011, 09:55 PM
Hi friends.
65535 internal fault with your dump.
All the softwares I used gave me this error, I have a working dump but it has switch and lamp for kids.
Thanks, I still need a working dump.
Regards,
Nuno

ovi_dk
20th December, 2011, 10:10 PM
Second hit

ovi_dk
20th December, 2011, 10:27 PM
And this its the last one

carsolution
20th December, 2011, 11:26 PM
Hi friends.
No luck.... tried all the dumps and always the internal error.
I have here one that works but has the kids switch and light warning.
regards,
Nuno