Bsi berlingo E01-00

[pedrodiaz]

Hi,
I have a broken BSI, and I have changed the 95160 with another BSI that works, but the car not start.

Does anyone know what can happen?

[Youneselm]

immo is in flash of mcu.
you have to desolder the mcu.

[pedrodiaz]

immo is in flash of mcu.
you have to desolder the mcu.

In the Nec D76F0018GJ?? It?s possible read this MCU?

Thanks!!

[barti122]

Freq for leaking the eeprom. you must do the reading and then programmed again. my pure batch upload and program everything from scratch PP2000 PIN etc. tested work 100%

[marrijonas]

Use Lexia 3 for BSI programing routine.

[pedrodiaz]

Freq for leaking the eeprom. you must do the reading and then programmed again. my pure batch upload and program everything from scratch PP2000 PIN etc. tested work 100%

I'm sorry, I do not quite understand, so i write in the eprom the file "berlingo Virg.rar", what I have to do next?.

Thanks!!

[khalcdi]

usualy if your secand hand BSI good , whene you change the eeprom 95160 the car start and all works good.
but samtimes must you reprog the BSI and all options of the car.
is not neccessary to writte the file "berlingo virg" just learn the keys, writte VIN number,telecode BSI with option which exsite in your car. and your car start.

[pedrodiaz]

usualy if your secand hand BSI good , whene you change the eeprom 95160 the car start and all works good.
but samtimes must you reprog the BSI and all options of the car.
is not neccessary to writte the file "berlingo virg" just learn the keys, writte VIN number,telecode BSI with option which exsite in your car. and your car start.
with what software i write the VIN number, and telecode the BSI???

Thanks!!

[khalcdi]

use lexia is perfect.

[kar407]

in the bsi telecode the type of engine, i see this probleme in a berlingo that the type of engine is hybride

[pedrodiaz]

Please,
I can?t read The Vin a pin code. My dump it?s corrupt??

[barti122]

your dump ist corrupt no vin , no pin. read pin in ecu

[Zmann]

If I understand correctly these types of your BSI have quite many algo's, consequently different locations of VIN/PIN in the dump. That answers why just changing eeprom not working if the two are with different version. The most practical way is to virginise the new BSI and use PPS (Lexia). Or try to move both D76F0018GJ and 95160

Too late upload my post, barti122 is correct.

[pedrodiaz]

If I understand correctly these types of your BSI have quite many algo's, consequently different locations of VIN/PIN in the dump. That answers why just changing eeprom not working if the two are with different version. The most practical way is to virginise the new BSI and use PPS (Lexia). Or try to move both D76F0018GJ and 95160

Too late upload my post, barti122 is correct.
Please,

The dump virgen for this Bsi?

Thank you very much!!

[Zmann]

Never done berlingo but only some PG206 with the same NEC MCU, don't know that they are the same. Why not try the one above.

Is your BSI looked like this

[pedrodiaz]

Hi,
I have the dump Ecu of Berlingo problem with BSI (1.6 Hdi, EDC16C34).
Please VIN and PIN??

Thanks!!

[lihaven77]

Hi,
I have the dump Ecu of Berlingo problem with BSI (1.6 Hdi, EDC16C34).
Please VIN and PIN??

Thanks!!

pin W404

[pedrodiaz]

Hi,
I need the pin out of Bsi berlingo E01-00 for program with lexia.

Does anyone have it?

Thanks!!

[cucu4u]

pinout for lexia ?
what are you talking about.
you need to program it via obd. that is what lexia do.

[drz]

Before you post something, check the date.