javiercj
23rd December, 2011, 01:16 PM
Hello friends.
Have two cars that I am investigating.
And what I want is virginizar the drive, do not cancel the inmo.
of is the goal that this unit in the same car but another brother and new encoding key allows me to start car.
Or search for pin-code in the ecu, and tell me if I am in error? search the pin-code in the dump of the eeprom put it in FF FF the code.
And so again to load the file into the eeprom. And would now only be coded keys to get the car boot.
are two cars that I'm doing testing
and what I want is to mount a small database so that have located the position that occupy the pin-code and so when I enter the workshop any same brand and model.
find the position that occupies the pin-code virginizarlo and then encode key and reboot.
Whether to start the database and do the compartire with you.
But that me you have to help to resolve some poquillas doubts, if you can clear.
For example the car son:br - peuegeot 406 hdi 2200 year 2001
switchboard bosch edc15-c2 (0 281 010 877). memory eeprom according to listings which leads the immo is 95p08.
as I have already before hand pin-code.
the process is transforming the pin-code in hexadecimal, look at the dump read, but does not appear.
also I have considered implementing encryption left table mauro day boundiello and not doing the conversion get me and even investing the code, please help
-I have a peugeot 307 gasoline is an ecu bosch mp 7.4.5 (0 261 208 909)
and I was wondering without opening the ecu if it is possible to extract by obd and type of interfaaz to get the flash memory chip where this cartography and where also stored the immo, and intentae the same process, also was the leading the immo in the eeprom.
But for this model last not find in the listed only available memory where leads immo.
And before opening the unit I would like to know if for interface obd-2 could get the laectura of the cartography and takes full, and the eeprom reading, but I think I already advance that the EEPROM not.
and also if possible I say, if there is any maquitinita so if I put the key to the car I get directly the code of the transponderdor, and so this way obtain the pin code.
and if the code of the tranasponderdor is equal to the pin-code of the immo. I think that no, but to see if I thing you can confirm.
This last is to get into the encoding of the keys you could guide me where begin?
But first thing is what I want, I hope your support thank you very much
Have two cars that I am investigating.
And what I want is virginizar the drive, do not cancel the inmo.
of is the goal that this unit in the same car but another brother and new encoding key allows me to start car.
Or search for pin-code in the ecu, and tell me if I am in error? search the pin-code in the dump of the eeprom put it in FF FF the code.
And so again to load the file into the eeprom. And would now only be coded keys to get the car boot.
are two cars that I'm doing testing
and what I want is to mount a small database so that have located the position that occupy the pin-code and so when I enter the workshop any same brand and model.
find the position that occupies the pin-code virginizarlo and then encode key and reboot.
Whether to start the database and do the compartire with you.
But that me you have to help to resolve some poquillas doubts, if you can clear.
For example the car son:br - peuegeot 406 hdi 2200 year 2001
switchboard bosch edc15-c2 (0 281 010 877). memory eeprom according to listings which leads the immo is 95p08.
as I have already before hand pin-code.
the process is transforming the pin-code in hexadecimal, look at the dump read, but does not appear.
also I have considered implementing encryption left table mauro day boundiello and not doing the conversion get me and even investing the code, please help
-I have a peugeot 307 gasoline is an ecu bosch mp 7.4.5 (0 261 208 909)
and I was wondering without opening the ecu if it is possible to extract by obd and type of interfaaz to get the flash memory chip where this cartography and where also stored the immo, and intentae the same process, also was the leading the immo in the eeprom.
But for this model last not find in the listed only available memory where leads immo.
And before opening the unit I would like to know if for interface obd-2 could get the laectura of the cartography and takes full, and the eeprom reading, but I think I already advance that the EEPROM not.
and also if possible I say, if there is any maquitinita so if I put the key to the car I get directly the code of the transponderdor, and so this way obtain the pin code.
and if the code of the tranasponderdor is equal to the pin-code of the immo. I think that no, but to see if I thing you can confirm.
This last is to get into the encoding of the keys you could guide me where begin?
But first thing is what I want, I hope your support thank you very much