Bricked?

[kq501]

I've a eurovox blue.

I've succesfully managed to update firmware on 2 boxes (blue and red). This other one just stays on standby (red light).

I've looked around to try find a fix but at a loose end. Any help appreciated?

It's not a clone box.

[smirnoff_rules]

look here m8 http://www.digital-kaos.co.uk/forums/f71/eurovox-capacitor-23233/

[HiTeck]

Try as smirnoff_rules said above and if you still have no luck take the lid off the box, if it's genuine you will see a small black reset button, with the box turned off at the mains press and HOLD the reset button start the UFL and press download, press start when prompted wait 2 seconds turn the box on at the mains then release the reset button then the firmware should/hopefully start writing.

BE CAREFUL when turning the box on and holding the reset button down that you dont touch ANYTHING else inside the box. Electric shocks hurt :) (you could hold the reset button down with a pencil if your nervous)

It may take a few attempts but I have got a few going like this when the caps have been fine otherwise it's jtag time.

[kq501]

thanks guys for help. The c14 thingy is domed at the top. Are they easily replaced?