C4E?s iXtreme LT+ v3.0 in association with Team Jungle & Team Xecuter

[cunny]

C4E***8217;s iXtreme LT+ in association with Team Jungle & Team Xecuter
-------------------------------------------

Official release of the iXtreme LT+ v3.0 for Benq and phat Liteons

- Support for topology data on AP25 enabled titles. Will correctly answer any ap25 challenge eliminating need for dae.bin to create a backup.

- No need to make new backups everytime dae.bin is updated on console

Topology Data
-------------

When ap25 was first introduced I devised a way of calculating any challenge which I called the silver bullet which I made reference to a long time ago.
This was withheld until it was absolutely necessary. It was easier to replay the fixed challenges.

With unique per console ap25 challenges it has become necessary to use the silver bullet.

A series of measurements are taken across the disk. This topology data is then used to calculate a response to any ap25 challenge.

It is very important that the drive used to create the topology data is reliable at reading discs as bad topology data equals bad ap25 responses.

Liteon drives using 0800 v3 seem to be more accurate for this purpose. Only ap25 enabled titles require topology data. Activation of ap25 on older non-ap25 games although technically possible is highly unlikely.

Currently topology data for xgd3 titles are similar and topology data from one xgd3 title will pass on another xgd3 title although this is not advisable.

Per title title topology data is best as there are slight differences between titles and newer titles could have different topology than existing ones.


I would like to wish everyone a merry xmas and a happy new year. I look forward to the challenges ahead.

Thanks go to Team Jungle for their hard work and efforts in the development process.
Thanks also go to Team Xecuter for their support to this project.

Topology Files for iXtreme LT+ v3.0

Released: 12/25/2011
====================================

After an exhaustive development process we are pleased to release these disc
profile topology patches for the iXtreme LT+ v3.0 firmware.

These patches are based on millions of angle measurements spanning hundreds of
hours to get the most accurate values possible.


There are currently two patches available:


1) XGD2.COD-BO.COD-MW2.Halo-Reach.top.data.v1.bin

SUITABLE FOR THE FOLLOWING GAMES ONLY:

a) Call of Duty: Black Ops

b) Call of Duty: Modern Warfare 2

c) Halo: Reach (XGD2 ONLY, don't use this on backups of the XGD3 beta)

These games have the exact same topology and therefore can share the same
profile data. This was confirmed by doing at least 35 iterations of profile
data for each game and analyzing the results. Over millions of measurements,
not a single one deviated from the median by more than 1 degree, and there
were no cumulative effects at all. These games are identical in the way they
were mastered.



2) XGD3.Profile.ID.F87A804E.top.data.v1.bin

Suitable for all XGD3 games with this disc profile ID:

0C3DF524599094E6CB87ECC8-F87A804E

This covers all current XGD3 releases (at the time of writing) except for
the Halo: Reach XGD3 beta.

Check bit.ly/ap25list and stay up to date with the latest news on the usual
sites so you don't end up patching and burning the wrong data if a new XGD3
game comes out with a different disc profile ID (there are several more
already waiting in dae.bin).



Media ID shouldn't matter since we always check our data against all foreign
versions of games in DAE.bin using the targets from the v12 table and several
unique per-Xbox v8 tables. Again, stay up to date with the latest news in case
this situation changes.

P.S. You may be thinking that it's better to use topology data taken from a
specific title or pressing... and that may be true... but only if you do a
multitude of iterations and take the average values. You would most likely
end up with extremely similar data to ours (if your drive and disc are OK),
with only very small deviations where measurements were right in between two
integers, and could effectively go either way.

We certainly don't want to discourage people from doing their own measurements,
but please be aware that it is very easy for some drives to screw up an angle
measurement, and even small screw ups or a general bias in timing can have a
great impact on LT+ responses.

P.P.S We've included an example of how we process our multitudes of iterations
in case you think this is all a bunch of BS. It's a massive html file so be
careful if you don't think your system or browser can handle it.


More patches will be released in the coming days or weeks as required.


Thanks go to c4eva, Seacrest, Team Jungle & Team Xecuter.

Enjoy and Merry Christmas! We look forward to all future challenges in 2012.
Xbox Backup Creator v2.9 Build:0350 by Redline99

Changed - Minor tweaks to Image Browser dialog
Changed - AP25 iXtreme LT+ v3.0 method to "Profiling"
Changed - Image Browser to better match stand alone app
Removed - Convert to SplitVid tool
Removed - ISO Tagging feature
Fixed - Ripping xgd1 titles
Fixed - xgd3 drive response SS details
Fixed - Assortment of minor issues
Added - Windows 7 Taskbar Progress

To patch the median file for LT+ v3.0

Image Tools > select inject > load iso > click AP25 Sector > load median.bin and patch > burn with iHas Driver + BurnerMax FirmwareMany thanks to the Team(s) behind the latest FW an all the best to everyone :)

Firmware : Hotfile.com: One click file hosting: Latest_iXtreme_and_Stock_Firmware_Pack.rar (http://hotfile.com/dl/138421984/5af9992/Latest_iXtreme_and_Stock_Firmware_Pack.rar.html)

Topology Data : Hotfile.com: One click file hosting: X360.Topology.Data.2011-12-25.rar (http://hotfile.com/dl/138441094/20a12b0/X360.Topology.Data.2011-12-25.rar.html)
JungleFlasher.0.1.91.Beta(300).rar : http://hotfile.com/dl/138603762/d6c932f/JungleFlasher.0.1.91.Beta%28300%29.rar.html
XBOX Backup Creator : http://www.multiupload.com/ZWUW3JLI7R

Ubers guide on how to patch iso's http://team-xecuter.com/forums/showthread.php?p=507073#post507073

[no1male]

Oh wow that sounds confusing. Congrats on the firmware!

Now need to get the kit to try it out :-)

sent from my fat little fingers

[samlen27]

when i load my firmware its coming up 1.1 in jungleflasher is that ok to do

[cunny]

JF aint been updated to see LT3.0 as long as your key is ok the FW will be fine

[martiboy]

Merry Xmas guys


Sent from my iPhone using Tapatalk

[dragazar]

can i get any firmware to burn discs for my TssTcorp SH-S222A SB01 burner ?? :D will any of the ones that has been released work on it is what mean ? :D .
Also i patched G.O.W.3 with xbc, it loads up now without using a usb, but still fails verifcation :( mnaybe bad rip or i need a new burner :S strange tho coz mwf3 works, and a few others

[martiboy]

You really need to get yourself 1 of the ihas burners that have already been listed. You can pick them up for as little as ?15. You are still burning the old way and will only burn 97% of the game so you will always run into probs. for the money you are saving on games don't be tight and buy a burner


Sent from my iPhone using Tapatalk

[cunny]

http://www.digital-kaos.co.uk/forums/f14/trunacte-lt-3-0-a-242913/#post1360755

[dragazar]

thanks merry xmas :)

[pl1976]

So is it the case when i have mine updated to 3.0 i will have to reburn all my ap25 & xgd3 games? If so need to get myself a burner end up bit pricey ordering more.

[martiboy]

So is it the case when i have mine updated to 3.0 i will have to reburn all my ap25 & xgd3 games? If so need to get myself a burner end up bit pricey ordering more.

If you have been on live lately then yes you will need LT+3.0 and reburn because you games will no longer work. If you havent and your games are till working then no you wont need LT+3.0 YET so no reburns. I dont see how it could be pricy. ?15 for burner and use 1000s of times. less than ?1 for a disc. Original =?40+. If you dont want to fork out a pound just play your original games. :beheaded:

[cunny]

when i load my firmware its coming up 1.1 in jungleflasher is that ok to do

Jungleflasher been updated and link in OP

[maddy7]

Does anyone know if Assassins Creed Revelations can be patched with the generic xgd3 topology. Although it is stated that it if ok for all current xgd3 it is not in the list at bit.ly/ap25list However Brotherhood is. As Brotherhood was released Nov 2010 is it meant to say Revelations?

[martiboy]

Does anyone know if Assassins Creed Revelations can be patched with the generic xgd3 topology. Although it is stated that it if ok for all current xgd3 it is not in the list at bit.ly/ap25list However Brotherhood is. As Brotherhood was released Nov 2010 is it meant to say Revelations?

Assassins Creed Revelations CAN NOT be patched with the brotherhood patch. They are different patches Revelations = xgd3 brotherhood= xgd2. Now as far as revelations go the universal patch is meant to work on all xgd3 games but some people are having problems with revelations. Give it a try and if you cant get it to work let me know and i will get you a single revelations patch.

[maddy7]

Thanks I've used the universal patch for Revelations and will try it later.

Does brotherhood need patching or can abgx360 still be relied upon?

[pl1976]

If you have been on live lately then yes you will need LT+3.0 and reburn because you games will no longer work. If you havent and your games are till working then no you wont need LT+3.0 YET so no reburns. I dont see how it could be pricy. ?15 for burner and use 1000s of times. less than ?1 for a disc. Original =?40+. If you dont want to fork out a pound just play your original games. :beheaded:

does this do the trick ? Or theres another one SATA ?24.99:
LITE-ON iHAS324 Internal DVD Writer | Dixons | (http://www.dixons.co.uk/gbuk/lite-on-ihas324-internal-dvd-writer-09949641-pdt.html?intcmpid=display~RR~~09949641)

[martiboy]

Thanks I've used the universal patch for Revelations and will try it later.

Does brotherhood need patching or can abgx360 still be relied upon?

I dont think there is a patch for brotherhood yet. To be honest im not sure if abgx will be enough to patch for use on LT+3.0. All i can say is give it try.

[martiboy]

does this do the trick ? Or theres another one SATA ?24.99:
LITE-ON iHAS324 Internal DVD Writer | Dixons | (http://www.dixons.co.uk/gbuk/lite-on-ihas324-internal-dvd-writer-09949641-pdt.html?intcmpid=display~RR~~09949641)

Yes mate that 1 will do just fine. Once you get it all you need to do is flash with the burner max fw. You willfind it in 1 of my other posts.

[cunny]

I have read that there are bogus topology files doing the rounds.

This is the 1 posted thats the right 1 Hotfile.com: One click file hosting: X360.Topology.Data.2011-12-25.rar (http://hotfile.com/dl/138441094/20a12b0/X360.Topology.Data.2011-12-25.rar.html)

This is the clarification post from team xecuter

http://www.team-xecuter.com/forums/showthread.php?t=78560

[martiboy]

Thanks I've used the universal patch for Revelations and will try it later.

Does brotherhood need patching or can abgx360 still be relied upon?

Here you go dont say im not good to you. This is the patch for brotherhood only and NOT for anything else. This is confirmed as working with many users. Enjoy

[maddy7]

Here you go dont say im not good to you. This is the patch for brotherhood only and NOT for anything else. This is confirmed as working with many users. Enjoy

Thanks. I'll try it tomorrow. I can confirm Revelations boots and plays with the generic patch.

[pl1976]

Yes mate that 1 will do just fine. Once you get it all you need to do is flash with the burner max fw. You willfind it in 1 of my other posts.

thanks m8. is there anywhere that will sell this with a caddy as only have a lappy therefore will have to connected via usb ?

[martiboy]

thanks m8. is there anywhere that will sell this with a caddy as only have a lappy therefore will have to connected via usb ?

Your best bet would be ebay. If your going to use a laptop then you will also need some way to power it. There is also wires on ebay cant mind what they are called but i will be back on soon and have a check for you

[tomaswl1]

hi is this the topology patch for assassins creed brotherhood

[martiboy]

hi is this the topology patch for assassins creed brotherhood

Yes the 1 from post 20

[aleister crowley]

I read this elsewhere but just about sums it up for me:

Microsoft can do whatever they want to do at any point. The fact now that they can remove your firmware without your permission and flash it back to stock just kills it all for me. You could spend time burning your games, spend money on discs then BOOM none of your discs work anymore and you have to not only get your console re-flashed but re-burn all of your games again.
It's not by mistake that every XGD3 title except Halo uses the same security code, it's by design so all of a sudden MS can change it and once again force everyone to re-burn titles. c4eva is calling 3.0 a silver bullet only because all the games share the same security code right now...but watch, it'll change soon enough...MS isn't stupid they just sit back anymore waiting until the modders catch on then they take action with disabling backups again.

I've give up with the 360 now.
I refuse to flash them or burn games for people anymore because they are going to come back 3 months down the line moaning that their console/games won't work anymore.
Can't be arsed with the aggro.

[cunny]

I read this elsewhere but just about sums it up for me:

Microsoft can do whatever they want to do at any point. The fact now that they can remove your firmware without your permission and flash it back to stock just kills it all for me. You could spend time burning your games, spend money on discs then BOOM none of your discs work anymore and you have to not only get your console re-flashed but re-burn all of your games again.
It's not by mistake that every XGD3 title except Halo uses the same security code, it's by design so all of a sudden MS can change it and once again force everyone to re-burn titles. c4eva is calling 3.0 a silver bullet only because all the games share the same security code right now...but watch, it'll change soon enough...MS isn't stupid they just sit back anymore waiting until the modders catch on then they take action with disabling backups again.

I've give up with the 360 now.
I refuse to flash them or burn games for people anymore because they are going to come back 3 months down the line moaning that their console/games won't work anymore.
Can't be arsed with the aggro.

Thats totally your opinion and guess what, your entitled to it :)

The fact is, nobody forces anyone to have thier drive flash to a CFW. Its your choice, everyone should now know the risks involved.

There are other option that are open to you. Not just CFW. There are now ODDE's the new RGH, granted that niether are live safe.

Or you could just simply take the risks or flash your console back to stock and forget about it

[Hawkk]

I read this elsewhere but just about sums it up for me:

Microsoft can do whatever they want to do at any point. The fact now that they can remove your firmware without your permission and flash it back to stock just kills it all for me. You could spend time burning your games, spend money on discs then BOOM none of your discs work anymore and you have to not only get your console re-flashed but re-burn all of your games again.
It's not by mistake that every XGD3 title except Halo uses the same security code, it's by design so all of a sudden MS can change it and once again force everyone to re-burn titles. c4eva is calling 3.0 a silver bullet only because all the games share the same security code right now...but watch, it'll change soon enough...MS isn't stupid they just sit back anymore waiting until the modders catch on then they take action with disabling backups again.

I've give up with the 360 now.
I refuse to flash them or burn games for people anymore because they are going to come back 3 months down the line moaning that their console/games won't work anymore.
Can't be arsed with the aggro.

Nay. They all come with the same AP2.5 topology (to date) and this is imprinted on the discs, so MS can't just change it. They can change the challenges to that data, but (in theory) iXtreme 3.0 can handle them.

I'm sure that MS will take further measures (with future titles?) to prevent backups, but with 2011 titles I think we are safe with the current CFW.

[martiboy]

I read this elsewhere but just about sums it up for me:

Microsoft can do whatever they want to do at any point. The fact now that they can remove your firmware without your permission and flash it back to stock just kills it all for me. You could spend time burning your games, spend money on discs then BOOM none of your discs work anymore and you have to not only get your console re-flashed but re-burn all of your games again.
It's not by mistake that every XGD3 title except Halo uses the same security code, it's by design so all of a sudden MS can change it and once again force everyone to re-burn titles. c4eva is calling 3.0 a silver bullet only because all the games share the same security code right now...but watch, it'll change soon enough...MS isn't stupid they just sit back anymore waiting until the modders catch on then they take action with disabling backups again.

I've give up with the 360 now.
I refuse to flash them or burn games for people anymore because they are going to come back 3 months down the line moaning that their console/games won't work anymore.
Can't be arsed with the aggro.

Why dont you get a slim. That way only you can lock and unlock the drive for updating the fw

[aleister crowley]

Why dont you get a slim. That way only you can lock and unlock the drive for updating the fw

I use a PS3 now mate.

[mafiaprince]

How about Need for Speed hot pursuit..Can it be play on LT3.0 if upgrade my phat lite-on..

[martiboy]

How about Need for Speed hot pursuit..Can it be play on LT3.0 if upgrade my phat lite-on..

Not unless you get a working patch. NFS HP is a xgd2 ap2.5 games and none of the universal patches will work. Whats your disc ID and i will have a look for a working patch

[technission]

anyone find patches for fable III yet for lt3.0?

[martiboy]

anyone find patches for fable III yet for lt3.0?

Yes but you will need to tell me what your disc id is.

[pl1976]

Your best bet would be ebay. If your going to use a laptop then you will also need some way to power it. There is also wires on ebay cant mind what they are called but i will be back on soon and have a check for you

Did you have anyjoy with this mate?

[martiboy]

Did you have anyjoy with this mate?

Shit mate im sorry. I totaly forgot all about your post. Your needing somthing like this (http://www.ebay.co.uk/itm/USB-2-0-SATA-IDE-CABLE-HDD-W-POWER-ADAPTER-UK-/320383801768?pt=UK_Computing_CablesConnectors_RL&hash=item4a985cd9a8)

[pl1976]

Would a still need a caddy ?

[martiboy]

Would a still need a caddy ?

A caddy would just be used to make it look good. So if you dont mind looking at the drive the way it is then no you wont need a caddy. I would personally just get the wire kit and when your not using the drive just pop it out of site in cupboard somewhere

[pl1976]

A caddy would just be used to make it look good. So if you dont mind looking at the drive the way it is then no you wont need a caddy. I would personally just get the wire kit and when your not using the drive just pop it out of site in cupboard somewhere

thanks m8 thats everything ordered will be back on during the week to get the tut and firmware etc.

[chriskross]

does anybody have topol. data for NFS Run PAL?

[martiboy]

does anybody have topol. data for NFS Run PAL?

Here you go.

[cunny]

You need more than Topology Data to fix that image

[JoeGee]

cheers for the ap25 though