PSG16 pin

[dyc]

does this psg16 dump contain pin code carprog shows xxxx in line where schould be pin are only 0000 and can no login pump to reset , vin was changed when it came to key programming so is useless

[micromax]

try 1023 and report

[dyc]

try 1023 and report

thanks ,with this pin code can acces immo functions but still can not reset pump ecu because login incorrect and security time counting

[micromax]

if you enter before wrong pin you have security time. try connect to psg 16 and stay connected 30min, after enter correct pin. opcom don`t ask security time. only tech2 say on it.

[dyc]

if you enter before wrong pin you have security time. try connect to psg 16 and stay connected 30min, after enter correct pin. opcom don`t ask security time. only tech2 say on it.

no succeed ,after 40 min. and ecu reset says that entered pin code is wrong and reset failed

[micromax]

you reset psg16 directly by opcom or by immobilaiser box ?

[zoro1]

If the pump is in old car and pin is correct ,mast be done with OPCOM,but if the pump is in the new body -there is no way to do it with OPCOM-only carprog to make it virgin.

[Gargamello]

SMOK (http://www.smok.com.pl/index.php?lang=pl&id=oferta&kategoria=1&produkt=59)

[dyc]

If the pump is in old car and pin is correct ,mast be done with OPCOM,but if the pump is in the new body -there is no way to do it with OPCOM-only carprog to make it virgin.

I got carprog and not reset this pump too , maided befor few times without problems but then pin was readed by carprog correctly and reset ok

[micromax]

try reset immo box, and after program pin from psg16, next reset ps16 by special funcion in immobox.
in this procedure psg and immobox must be in car

[dyc]

try reset immo box, and after program pin from psg16, next reset ps16 by special funcion in immobox.
in this procedure psg and immobox must be in car

of course resetted immo box ,erasing keys this pump makes me crazy

[zoro1]

are you shure the pump ECU is ok?Carprog read eeprom pr not?