Please need solution Vectra B immo

[omi1980]

In the car, vectra b engine is changed from the 2.0 DTH to 2.2DTI.Somebody change alone flash in ECU edc15M from 2.0DtH to 2.2 DTi and car does not start.MIL blink.Can somebody help my and make off in flash.Thanks

[lupu_sandu]

You cannot make immo off in flash m8.
You need to open ecu and read 24c04.
Anyway, a good immo off not exist. After 50 start, immo will be on again.

So best solution is: Read eeprom from ECU, find pin code and pair with immo.


PS: Happy new year DK!

[Doru Lucian]

hello Lupu_Sandu Can you tell me what software use,or haw do you extract pin from,eeprom .happy new year to you to

[omi1980]

You cannot make immo off in flash m8.
You need to open ecu and read 24c04.
Anyway, a good immo off not exist. After 50 start, immo will be on again.

So best solution is: Read eeprom from ECU, find pin code and pair with immo.


PS: Happy new year DK!

Hello
I have pin from Ecu it is still same after flashing.I can log in Immo but how can i change VIN in Ecu and pair with immo.Op com have not this funktion or i thing wrong

Happy New Year:party:

[Meat-Head]

After 50 start, immo will be on again.



Lift pin 7 - join to 8 - deny all knowage?

Do a search there is an immo off file on here - same ecu as rover 25 diesel

Meat

[omi1980]

Please Off -read with op com.

[lupu_sandu]

You joking, right?
You post dump from immo and ask for immo off, beside i told you in post #2 that you need to open ecu and read 24c04?
Good luck m8.

[Meat-Head]

You joking, right?



At least he has more posts tha downloads - perhaps if he does a search for the me15.1 whatever the answer will apear.!

Then come back in 51 starts let us know.

Meat