Can anyone tell me is this dump ok?

[baze007]

4b0 920 900j vdo a6 2001 1.9tdi

[smokey08]

I think it looks ok.

KM's: 288291
Part number: 4B0 920 900 J
VIN: WAUZZZ4BZ1N067173
Immo ID: AUZ7Z0Y1604319
Login: 01323

You may be having problems because the dump is swap-bytes.

[looly]

I think it looks ok.

KM's: 288291
Part number: 4B0 920 900 J
VIN: WAUZZZ4BZ1N067173
Immo ID: AUZ7Z0Y1604319
Login: 01323

You may be having problems because the dump is swap-bytes.

Which program are you using to get this info from dump pls?

[smokey08]

I looked at the dump using winhex, noticed the VIN didnt look right so swapped bytes and saved then opened dump in vag eeprom programmer 1.19.

[adam28]

here is your file byte swapped.

And Vag eeprom programmer for you to play with.

[baze007]

Dump is readed with willem programer,I,m readed 4 times and it gave me the same value evrytime. I cant wrote on the same chip 93c86,i tried to swap byte but it didn,t gave me any resultats..........Where is my mistake?


Thanks you all for your help

[smokey08]

Dump is readed with willem programer,I,m readed 4 times and it gave me the same value evrytime. I cant wrote on the same chip 93c86,i tried to swap byte but it didn,t gave me any resultats..........Where is my mistake?


Thanks you all for your help

What are you trying to do? I thought you were trying to get programs to recognize your dump.

You should be able to read and write a 93c86 with willem.