Lancer Evo Immo Problem

[Salvatar]

Hi mates
I have problem with Mitsubishi Lancer Evo 2004.
They don't have any keys and when I try program new with T300 they show me communication "Error". I will try program transponder ID 4D and 61. This is USA version with unusual immobox. How I can add new keys and where is immo data in this immobox ? Otherwise how I can make it immo off ?
Best Regards
Salvatar

http://img535.imageshack.us/img535/7149/obraz008nt.jpg
http://img252.imageshack.us/img252/7787/obraz005if.jpg
By humbart (http://profile.imageshack.us/user/humbart) at 2012-01-01

http://imageshack.us/photo/my-images/832/obraz009cu.jpg/http://imageshack.us/photo/my-images/535/obraz008nt.jpg/

[workdamnyou]

Search for a pinout of cable ADC129 on the forum. Then you'll be able to communicate with it.

[Manmart]

TMPro2 + Motorola MC68HC805P18 adapter (http://tmpro2.com/images/f1/adapter_805p18.jpg) . makes this car
Software module 143 - Mitsubishi, Subaru immobox Mitsubishi ID4D
Memory device is Motorola MCU MC68HC805P18 QFP44 package.
For reading this MCU you can use
Expected file size is 128 bytes.Use JMA TPX2 - Errebi TX2 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Mitsubishi: Eclipse, Galant, Lancer, Pajero, Montero, Shogun
Subaru: Tribeca, Forester, Impreza, Legacy

[Salvatar]

Search for a pinout of cable ADC129 on the forum. Then you'll be able to communicate with it.Thanks but I use this cable and I have been able to connect with car. I'm only can't program transponder. As I write I use transponder 4D and produced transponder from original service transponder.

TMPro2 + Motorola MC68HC805P18 adapter (http://tmpro2.com/images/f1/adapter_805p18.jpg) . makes this carOk but I don't have TMpro2 but maybe I can read this motorola with that http://etlweb.net/?ref=prod_prog_mc68hc805p18. If I forge ahead with this I tell you.

[simon77]

when you try to program transponder do you get an error code when you have finished
regards

[workdamnyou]

..................................................

[Salvatar]

Hi mates
Lancer starts and working fine. Thanks for help. They don't start because it's my fault. I don't check key count when I start program transponder.
It was 2 keys and I try program only one.
When I today try second time with RT3 I program 2 keys and everything works fine. I'm of course use transponders ID61.
If I will be able to help please write PM.
Best Regards
Salvatar

[KILL_THE_IMMO]

CONGRATULATION
ALSO SBB CAN DO THIS CAR

THANKS TO ALL

[Fallen]

Anybody got a pinout for ADC129? Mine never connects with Mitsubish.

[Rito]

I am lockin too for pinout for ADC129
T300 can?t conect in Mitsubish...

[Meat-Head]

There is a thread of pin out but no idea who had it last

THINK stalk ashraf116968?787666. Think he gad one wascwrong tp