View Full Version : how to read eeprom RH56
MrMike
3rd January, 2012, 04:10 AM
Hi guys, I am trying to read eeprom rh56 which is in prius transmission ecu for immo. Can anyone tell me what this chip is and if it can be re written.
cheers
stefaudio
3rd January, 2012, 07:20 AM
Hi MrMike this is 93c56 but may be rotated pins pay atention
MrMike
3rd January, 2012, 03:40 PM
Ok I will give it a try and report back. Is there a way to tell if the pin configuration is not normal or just with trial and error? Thanks a lot.
Mike.
Zmann
4th January, 2012, 01:31 AM
Look at the PCB pads. The standard chip has GND on pin 5, rotated one is on pin 7.
marco70
19th July, 2012, 08:01 PM
Memory ROHM BR93H56RF-W read and program Seeprog or Wellon VP-990
achaccha
19th July, 2012, 11:53 PM
I managed to read this report RH56, the problem is to write
http://www.digital-kaos.co.uk/forums/f178/toyota-hilux-2010-ecu-rh56-no-write-273757/
Mr_Fix
20th July, 2012, 04:08 AM
Look at the PCB. 6 and 7 pin unused!!!
Disconnect 6 and 7 pins in programmer panel. Write OK.
gwee
28th December, 2012, 05:35 PM
Hi Mike, I think i am having the same problem as you.
Do you happen to have the virgin eprom for the prius transmission controller?
Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.