PDA

View Full Version : edc 16 bosch


nokwueze
4th January, 2012, 08:04 AM
pls i have china bdm 100 how do i reprogramme
pls who can help me out
MotorMolestor
4th January, 2012, 09:50 AM
What car and which EDC16 version is it. Post details and a pic someone will help.
nokwueze
4th January, 2012, 09:45 PM
What car and which EDC16 version is it. Post details and a pic someone will help.

this is passat fsi 2.0 pls some help pls
06F 906 056CS
pvl
5th January, 2012, 05:06 AM
Hi,

Treat Med 9.5.1 as 9.1 as of bdm-pinouts and all will be good.

Look to attached pics.

Use orientation of red painted pin-one identifier on the flatcable as in last picture. You can directly connect with the other end into the female soldered sockets on the ecu, showed in pic 1 and 2.

Power your bdm interface ONLY and NOT the ecu.

Cheers,

PvL
nokwueze
22nd January, 2012, 10:35 PM
[QUOTE=pvl;1398959]Hi,

Treat Med 9.5.1 as 9.1 as of bdm-pinouts and all will be good.

Look to attached pics.

Use orientation of red painted pin-one identifier on the flatcable as in last picture. You can directly connect with the other end into the female soldered sockets on the ecu, showed in pic 1 and 2.

Power your bdm interface ONLY and NOT the ecu.

Cheers,

bros pls i have connected as shown in the pic but still the same is not working (is china bdm) is china bdm same as the original