PDA

View Full Version : Renault Master Add Key


gurmk
6th January, 2012, 02:10 PM
Is it possible to add another key to Renault Master 2008 using Carprog v4.55. I have just bought the Carprog and am new to it. Any help will be greatly appreciated.
obdmaster
6th January, 2012, 08:50 PM
No, you will need something like abrites renault, truecode etc for that m8.


I have carprog full , and key programming capabilities are a little limited m8
gurmk
6th January, 2012, 10:14 PM
I had a sinking feeling that what you said would be the case. Been looking at "Renault Explorer, Tmpro2, True Code and of course Abrites".
I already have Abrites Basic with KeyTag, so might opt for the RR06.
Many Thanks for your help.
Gurmk


No, you will need something like abrites renault, truecode etc for that m8.


I have carprog full , and key programming capabilities are a little limited m8
lupu_sandu
6th January, 2012, 11:58 PM
U can use tagtool. Just read 93c66 from UCH and use tagtool for add key in dump.
gurmk
13th January, 2012, 11:44 PM
U can use tagtool. Just read 93c66 from UCH and use tagtool for add key in dump.

What do I use to read and write dump?
Correct me if I an wrong but I think the 2008 has UCH 95160
obdmaster
14th January, 2012, 12:15 AM
What do I use to read and write dump?
Correct me if I an wrong but I think the 2008 has UCH 95160

If its 95160 you can use UPA programmer or xprog-m or any other programmer that supports st95160 . 95160 is 8 leg m8 easy to remove and replace on pcb.
pianoman58
14th January, 2012, 01:28 AM
Lupu:
Where can i buy tagtool from
Thanks